pokeatyou2 Posted March 14, 2007 Report Share Posted March 14, 2007 my next mods i thinking about are v force 3s from what i have read these are one of the best bang for your bucks. i will be doing away with boyeson power reeds on stock cages. will i notice the difference between them performance wise? but im also considering some new 28mm carbs bored to 30mm off ebay they are kehien copys (oko) from carbspartswarehouse. the only thing im worried about is if these will clear the clutch arm. im not running reed spacers and i dont want to i have the modquad billet intake will built in cross over this intake is fairly thick so i dont want to have to put in reed spacers if i dont have to. i have already had to modify my rear plastics to fit in the over bootle becasue of how thick to modquad intake is it pushed the carbs and airbox etc back . so i think i have just answered my own question this would be the same as reed spacers the added thickness is just actually on the intake to clear the clutch arm. am i correct?? Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted March 14, 2007 Report Share Posted March 14, 2007 Cool glad we could help.................... :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
woodro77 Posted March 14, 2007 Report Share Posted March 14, 2007 i have the 30mm oko's with v-force 3's and and they bolted up fine , did not hit the clutch arm , Quote Link to comment Share on other sites More sharing options...
brugal Posted March 14, 2007 Report Share Posted March 14, 2007 Good to see you got the question answered,even if you answered it yourself. :wink: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.