theshee Posted February 22, 2007 Report Share Posted February 22, 2007 Has anybody ever used the High Temp powdercoating on your pipes. There is some powdercoating powder in Eastwoods that says it will stay good up to 1000 degrees. Just wondering if it would work on banshee pipes instead of chrome. You can get a chrome, silver, black, or stainless colored powder in the high temp powder. Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted February 22, 2007 Report Share Posted February 22, 2007 I use it all the time. Our black is good to 2000 degrees, the chrome-like is good for 1300 degrees. The silver here is polished(chrome-like) and the shield is the black. Both high temp coatings. Quote Link to comment Share on other sites More sharing options...
theshee Posted February 22, 2007 Author Report Share Posted February 22, 2007 Those pipes are coated? or just the black part? If those pipes are coated I like it! Do you powdercoat kaotik? If you do how much would you charge to do a set of shearers in the chrome like powdercoat? Quote Link to comment Share on other sites More sharing options...
highroller355 Posted February 23, 2007 Report Share Posted February 23, 2007 Those pipes are coated? or just the black part? If those pipes are coated I like it! Do you powdercoat kaotik? If you do how much would you charge to do a set of shearers in the chrome like powdercoat? ya he works for a place i think. Just wanna say his work is awesome. I have some parts that he has powder coated and they look great and are strong. i highly recommend just my .02 Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted February 23, 2007 Report Share Posted February 23, 2007 Here's a set I had done in high temp silver, and the letters were traced in high temp black. The came out good, but I only used them for 2 rides before I bought PT Mids. Quote Link to comment Share on other sites More sharing options...
theshee Posted February 23, 2007 Author Report Share Posted February 23, 2007 hmmmm..... thats not quite shiny enough... may have to chrome them after all.. Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted February 23, 2007 Report Share Posted February 23, 2007 hmmmm..... thats not quite shiny enough... may have to chrome them after all.. Ohh yeah, not at all, all of the high temp PC colors are flat. The cermic coat gives it a little shine, but nowhere near chrome. Out here on the east coast we don't roll with all that bling though, mostly woods, trails, dirt and mud. :ohmy: Quote Link to comment Share on other sites More sharing options...
theshee Posted February 23, 2007 Author Report Share Posted February 23, 2007 Cool stuff. thanks for the pic and info liftd. :thumbsup: Quote Link to comment Share on other sites More sharing options...
camatv Posted February 23, 2007 Report Share Posted February 23, 2007 the only thing that blings like chrome is chrome.. this is the best i have seen thats not chrome. www.columbiacoatings.com check out the high temp coatings. its a bitch to do them right and you have to polish it when you are done.. just sell the bare shearers and buy a set that are already chrome ?? Quote Link to comment Share on other sites More sharing options...
theshee Posted February 23, 2007 Author Report Share Posted February 23, 2007 My shearers are chromed. They are brand new and after we put them on I was wiping the hand prints off and a big ole piece of chome came off. It was retarted, I didnt hardly touch it and it came off... Here is a pic of what came off... Its that triangle on there... :: Quote Link to comment Share on other sites More sharing options...
jmkapala Posted February 23, 2007 Report Share Posted February 23, 2007 My shearers are chromed. They are brand new and after we put them on I was wiping the hand prints off and a big ole piece of chome came off. It was retarted, I didnt hardly touch it and it came off... Here is a pic of what came off... Its that triangle on there... :: Can you not send them back? Quote Link to comment Share on other sites More sharing options...
yamaha04 Posted February 23, 2007 Report Share Posted February 23, 2007 holy shit man tell me im seeing things and this isnt the peice that came off. if so i would send thoughs things back. or if you bought them new but off some guy then i would just send that one pipe out for rechrome it would probably be the best and easyest way Quote Link to comment Share on other sites More sharing options...
06BaNsHeE Posted February 23, 2007 Report Share Posted February 23, 2007 I notice something weird under the flash. Quote Link to comment Share on other sites More sharing options...
theshee Posted February 23, 2007 Author Report Share Posted February 23, 2007 Its this piece right here thats off... Its not big or noticeable too much, but it pisses me off. I tried to send them back and it was one of those deals I couldnt prove I didnt do it so yeah, i got bent over. Here is a pic of it circled... Quote Link to comment Share on other sites More sharing options...
yamaha04 Posted February 23, 2007 Report Share Posted February 23, 2007 oh god thank the lord it wasnt what i was seeing lol still sucks either way Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.