JET 99 Posted February 17, 2007 Report Share Posted February 17, 2007 (edited) got my motor back. case port,woods/play cyl port,noss w/20 domes,already had billet impeller,+4 timing plate,.020 cleanup bore,pistons,bearings n seals,true n weld stock crank,200 w stator,v-3's,internal cross over intake,33 pwk's,shift shaft mod n spring,h-d clutch setup(builder's),k&n clamp- ons w(outerwears),inline temp guage....... what a wake up call........... was stock with t-5s and jet..... working on the tune but kinda shitty weather outside (mid indiana) i have got it running still starts a little too easy with out choke in 40 deg garage (10 deg outside) but what a wicked little motor.... heat cycled it like i was told.. have riden it at easy alternating rpms, 5 - 10 min at a time (warm up a few min).. and the last couple times i have had it out for a quick spin i never would have thought that the banshee low end could wake up like that and with (14 t) sprocket. and the throttle response is quick. and the pwr hit is a blast when it gets hooked up.. icy patches on pavement is a sideways affair which i aint bitchin... it was worth the funds to wake up the shee... it is a blast just cant wait for the spring time.. only thing that sucks is the air box would have been a total bitch to fit with carbs and intakes.. and now ive gotta be chicken shit with a puddle.... and i need to shield the outerwears against the stingers of the T-5s. i used a hose clamp to pull them over tward frame. still not comfortable with around an 1/8th inch clearence.. havent rode for more than 10 min too damn cold and snowy. and no weekend off since begin of jan.. i have a couple pics of suspension, and some of finshed product.. just suck at computers and pics to big to post.. thanks for all those who share info on this site..... Edited February 17, 2007 by JET 99 Quote Link to comment Share on other sites More sharing options...
Hollister_Hitman Posted February 17, 2007 Report Share Posted February 17, 2007 damn that is a big step up from stock. I have only ridden a piped banshee, I can't imagine what yours is like Quote Link to comment Share on other sites More sharing options...
JET 99 Posted February 17, 2007 Author Report Share Posted February 17, 2007 it was done by jeff.... dont want to start a builder thread (it was my choice) he did a damn fine job imo........... it came up on me in third the first time i crept up into the pipe... wasnt expecting that ... havent really played on any terrain in 1st or 2nd... no time to go and ride yet. learned to move up a little in third when litting her open up on flat ground pavement... havent had a chance to run on dirt winter set in just when i got motor back from jeff.. and work too.. got the elka long travel set up on rear.. looking forward when i get time to play on it..... Quote Link to comment Share on other sites More sharing options...
Dinner Posted February 17, 2007 Report Share Posted February 17, 2007 Damn, sounds like shee will be running sweet :thumbsup: Quote Link to comment Share on other sites More sharing options...
Washburn Posted February 17, 2007 Report Share Posted February 17, 2007 That is one sweet setup you have. Power and Elkas to handle all of that power :thumbsup: . Cant go wrong there. Give us all a report on how you like the motor/LT Arms- Suspention package. Set them as soft as you can and do a few laps then set them as stiff as you can do more laps then go rite in the middle do laps all on the same terrain and setup from there and you will be faster than everybody else :biggrin: Do you ride any motocross or is it all recreational riding you do? Quote Link to comment Share on other sites More sharing options...
GFB Posted February 17, 2007 Report Share Posted February 17, 2007 Where in Indiana? I bought my first shee last month and haven't been able to ride at all with this snow and miserable cold weather (plus I still haven't had a chance to verify the jetting is correct). I'm looking for a quad for the wife and we'll probably do some riding at the badlands when it warms up. Have you been there? I'm in Rensselaer and it's about a hour south near Attica. Quote Link to comment Share on other sites More sharing options...
gipperz Posted February 17, 2007 Report Share Posted February 17, 2007 Sounds like Jeff's got you making some power now. Just wait till you get it broke in and get on the throttle, your gonna grin for a week. :biggrin: Quote Link to comment Share on other sites More sharing options...
Trick2stroke Posted February 17, 2007 Report Share Posted February 17, 2007 I wanna see pics! Expecially of that elka rear end. Sounds sick. Host the pics with something like photobucket or bike pics. Quote Link to comment Share on other sites More sharing options...
JET 99 Posted February 17, 2007 Author Report Share Posted February 17, 2007 Where in Indiana? I bought my first shee last month and haven't been able to ride at all with this snow and miserable cold weather (plus I still haven't had a chance to verify the jetting is correct). I'm looking for a quad for the wife and we'll probably do some riding at the badlands when it warms up. Have you been there? I'm in Rensselaer and it's about a hour south near Attica. live s west indianapolis love to ride at the badlands.... better then haspin acres by far.. it would be cool to ride with some fellow HQers.. maybe this spring figure something out... :beer: :beer: Quote Link to comment Share on other sites More sharing options...
JET 99 Posted February 17, 2007 Author Report Share Posted February 17, 2007 That is one sweet setup you have. Power and Elkas to handle all of that power :thumbsup: . Cant go wrong there. Give us all a report on how you like the motor/LT Arms- Suspention package. Set them as soft as you can and do a few laps then set them as stiff as you can do more laps then go rite in the middle do laps all on the same terrain and setup from there and you will be faster than everybody else :biggrin: Do you ride any motocross or is it all recreational riding you do? pretty much recreational they do have a big gncc race in crawfordville in that i am thinking about entering would be just for fun..... id let everybody go take off then see how far id end up in the pack!!!!!! not to many motorcross tracks in indiana... Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted February 18, 2007 Report Share Posted February 18, 2007 it was done by jeff....dont want to start a builder thread (it was my choice) he did a damn fine job imo........... it came up on me in third the first time i crept up into the pipe... wasnt expecting that ... havent really played on any terrain in 1st or 2nd... no time to go and ride yet. learned to move up a little in third when litting her open up on flat ground pavement... havent had a chance to run on dirt winter set in just when i got motor back from jeff.. and work too.. got the elka long travel set up on rear.. looking forward when i get time to play on it..... Jeff who??? Glad your finally getting to take it for a spin. Get us some pics when you can. Quote Link to comment Share on other sites More sharing options...
JET 99 Posted February 18, 2007 Author Report Share Posted February 18, 2007 Jeff who??? Glad your finally getting to take it for a spin. Get us some pics when you can. that would be you ........................................ i just didnt want another pissin match and people posting replies that dont mean ______ to me.... hope things are going good for you !!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted February 18, 2007 Report Share Posted February 18, 2007 Yeah i knew that , was just messin with ya. :biggrin: Glad you like the more power everywhere port! And again , looking forward to some pics. Hey, at least your able to ride some as we have about 6" of snow still on the ground and 15 degrees here. Yuck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.