dajogejr Posted February 15, 2007 Report Share Posted February 15, 2007 I'm looking to complete the package for my bike. I saw for 159 or so, alloyboltz.com has "polished" bolts for the banshee....that's the way I'm looking to go. Anyone have a line on cheaper...or is that pretty much it? I figure I'm going this far...I might as well finish the bike off right. But, money is money ya know! Here's what I'm talking about... http://www.alloyboltz.com/catalog/product_...roducts_id=1111 Quote Link to comment Share on other sites More sharing options...
theshee Posted February 15, 2007 Report Share Posted February 15, 2007 I got that same bolt kit and wouldnt do it again. The self locking nuts dont work, threads strip off the bolt when it hits the nylon washer in the nut, and the bolts are really really soft. It was impossible to torque some of the bolts because they just kept stretching. The kit worked nice on the plastics, and cosmetic stuff, but was a royal pain in the ass on everything else. Quote Link to comment Share on other sites More sharing options...
nunyabinness Posted February 15, 2007 Report Share Posted February 15, 2007 isn't there a stainless steel set on flea-bay all the time? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted February 15, 2007 Author Report Share Posted February 15, 2007 Wow....my buddy swears by 'em. My biggest concern is the suspension bolts, namely...J Arm bolts, motor mounts and swinger....hmmm... Dumb question, but...did you use manual or air tools to tighten them all down? Quote Link to comment Share on other sites More sharing options...
majicmike Posted February 15, 2007 Report Share Posted February 15, 2007 DO NOT USE THEM ON YOUR MOTOR!!!!!!!! The top case bolt will stretch and can not get good tq on them. If you buy them go get yourself a bag full of lock washers. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted February 15, 2007 Author Report Share Posted February 15, 2007 DO NOT USE THEM ON YOUR MOTOR!!!!!!!! The top case bolt will stretch and can not get good tq on them. If you buy them go get yourself a bag full of lock washers. Nope, using stock stuff on the motor. Cases are gonna be PCd...so, that'll look good. I want nice looking bolts for the frame, suspension, etc.... Who/what do you recommend, Mike? I'm PC'ing my frame, cases, front spindles and hubs. I have Tyson drag J Arms for the front... I'm going the extra mile to have it look good AND run good...but, reliability and strength are more important... Quote Link to comment Share on other sites More sharing options...
majicmike Posted February 15, 2007 Report Share Posted February 15, 2007 Wow....my buddy swears by 'em.My biggest concern is the suspension bolts, namely...J Arm bolts, motor mounts and swinger....hmmm... Dumb question, but...did you use manual or air tools to tighten them all down? Its not evan is it? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted February 15, 2007 Author Report Share Posted February 15, 2007 Its not evan is it? Yep...he said just go to Alloyboltz.com....he's used 'em before. Quote Link to comment Share on other sites More sharing options...
bigboybanshee Posted February 15, 2007 Report Share Posted February 15, 2007 I second that...I picked mine up from ebay for 85 bucks, from alloyboltz and had the same problems. I had to replace several bolts that stretched and snapped the head right off. Overall, it's not a "bad" kit...just be prepared to pick up a few extra bolts when you put your bike back together Quote Link to comment Share on other sites More sharing options...
dajogejr Posted February 15, 2007 Author Report Share Posted February 15, 2007 WOW...thanks boys. I have a Metric specialty store close to work, maybe I'll swing by there. I just didn't want to use the same old, stock dingy bolts on a nice PCd frame and Chrome Jarms, Chrome aero metal tech swinger.... Quote Link to comment Share on other sites More sharing options...
highroller355 Posted February 15, 2007 Report Share Posted February 15, 2007 I got that same bolt kit and wouldnt do it again. The self locking nuts dont work, threads strip off the bolt when it hits the nylon washer in the nut, and the bolts are really really soft. It was impossible to torque some of the bolts because they just kept stretching. The kit worked nice on the plastics, and cosmetic stuff, but was a royal pain in the ass on everything else. had the same problem .they would just lock up you couldnt go tighter ,and you couldnt back them off. not sure if there is a new owner , i know it was up for sale. but i would not buy from them again still have half the set, Quote Link to comment Share on other sites More sharing options...
majicmike Posted February 15, 2007 Report Share Posted February 15, 2007 Nope, using stock stuff on the motor. Cases are gonna be PCd...so, that'll look good. I want nice looking bolts for the frame, suspension, etc.... Who/what do you recommend, Mike? I'm PC'ing my frame, cases, front spindles and hubs. I have Tyson drag J Arms for the front... I'm going the extra mile to have it look good AND run good...but, reliability and strength are more important... They where nice for stuff that was non-important I would not trust them for shocks j-arms swing arm or any thing your life depends on LOL. stainless steel is very soft and I would use the stock yamaha bolts they dont look the best but I would trust my life with them. or go to a good hardwear store and get at least grade 6 zinc/nickle plated bolt they look good. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted February 15, 2007 Author Report Share Posted February 15, 2007 Yeah, I hear ya. eating shit at 70 or 80 MPH on a run doesn't sound like a real healthy diet to me... I'll check with my metric specialty store, let you know what I find out... Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 15, 2007 Report Share Posted February 15, 2007 They where nice for stuff that was non-important I would not trust them for shocks j-arms swing arm or any thing your life depends on LOL. stainless steel is very soft and I would use the stock yamaha bolts they dont look the best but I would trust my life with them. or go to a good hardwear store and get at least grade 6 zinc/nickle plated bolt they look good. I wouldn't knock stainless steel as a fastener material. I would however stay away from alot of the specialty "bolt kits" that are out there simply because they use non-graded Chinese made fasteners. I have found that it was worth my time to go to a specialty fastener place and make my own kit. It takes more time, and can cost more money, but atleast you will have the piece of mind of knowing you have the correct, quality parts. :thumbsup: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted February 15, 2007 Author Report Share Posted February 15, 2007 I wouldn't knock stainless steel as a fastener material. I would however stay away from alot of the specialty "bolt kits" that are out there simply because they use non-graded Chinese made fasteners. I have found that it was worth my time to go to a specialty fastener place and make my own kit. It takes more time, and can cost more money, but atleast you will have the piece of mind of knowing you have the correct, quality parts. :thumbsup: Dammit...I want one stop shopping. Seriously....I'm glad I came here and asked....thanks boys. Owe ya! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.