May Posted February 14, 2007 Report Share Posted February 14, 2007 ok i just got in some 34 pj i got used they are on gas want to put them on alky need know what all needs to be done and how can i tell for sure they are 34 it has pj on the side and some other # but i want to be sure Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted February 14, 2007 Report Share Posted February 14, 2007 You should send them to a builder and have them set them up. They will drill out some passages to flow more fuel. You will also need power jets installed. Measure the opeaing on the motor side of the carbs to tell what size they are. You can go to Keihins web page for the measurments. Keihin US Web Page LINK Quote Link to comment Share on other sites More sharing options...
May Posted February 15, 2007 Author Report Share Posted February 15, 2007 You should send them to a builder and have them set them up. They will drill out some passages to flow more fuel. You will also need power jets installed. Measure the opeaing on the motor side of the carbs to tell what size they are. You can go to Keihins web page for the measurments. Keihin US Web Page LINK maby i should just try to trade for some already set up for alky Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted February 15, 2007 Report Share Posted February 15, 2007 Yea that would probably be better. Try to get some Keihin PWK's instaed. They are a much better desing carburetor than the PJ's Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.