Quint Posted February 7, 2007 Report Share Posted February 7, 2007 i am currently completely rebuilding my shee and have ordered loads of stuff from the states (i'm in the uk) I ordered the all balls swingarm rebuild kit from ebay and it seems like the boy has sent the wrong one! it says on the pack its for a yfm350 warrior and i am guessing this is completely different, the bits certainly dont look right. Thing is, its a mega ball ache and the bloke hasnt got back to me yet, so i guess the joy is all mine! any of you that know can you just confirm the warrior one is wrong. Thanks Quote Link to comment Share on other sites More sharing options...
yamaha04 Posted February 7, 2007 Report Share Posted February 7, 2007 well i just looked up the swingarm bearing kit in my rockymountin catalog and the part nubers are different and so is the price so im thinking your out of luck. Quote Link to comment Share on other sites More sharing options...
Quint Posted February 7, 2007 Author Report Share Posted February 7, 2007 guessed as much after a closer look last night! Thanks for looking. Quote Link to comment Share on other sites More sharing options...
yamaha04 Posted February 7, 2007 Report Share Posted February 7, 2007 guessed as much after a closer look last night! Thanks for looking. No problem Quote Link to comment Share on other sites More sharing options...
racer Posted February 10, 2007 Report Share Posted February 10, 2007 diff part number is a good way to tell things apart, until these situations. they are tied to different prices. IE, more for a banshee cause people will pay it, and so forth. time to get out the calipers and see if they are the same size. Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 18, 2007 Report Share Posted February 18, 2007 You could try cross referencing part number of different brands. It seems to me that Pivot Works has the same number kit for the Warrior and Banshee, but don't hold me to that. I didn't check my facts before posting. Quote Link to comment Share on other sites More sharing options...
FireHead Posted June 1, 2007 Report Share Posted June 1, 2007 You could try cross referencing part number of different brands. It seems to me that Pivot Works has the same number kit for the Warrior and Banshee, but don't hold me to that. I didn't check my facts before posting. JUst in case this issue is still open. The Warrior and Banshee swingarm bearing kits from Pivotworks are exactly the same except for the bearing race tube. The Warrior bearing race tube is about 25mm longer than one for a Banshee. I know this because I just bought a kit for a Warrior as it was what a shop had when I was there. I got home, tried to install it and thus learned why I shouldn't be listened to. I will be canvasing the Portland area looking for a Banshee kit today. :: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.