Bairdy13 Posted February 4, 2007 Report Share Posted February 4, 2007 Hey guys can some one tell me what is the best way to adj your camber and caster? A mate said I would need a camber and caster gauge! Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted February 4, 2007 Report Share Posted February 4, 2007 (edited) use a tape measure... messure the front and back and set them the same .. then measure top and bottom and set them about 1 inch less on top ...no special tool is needed this will do caster camber and tow picth so then you should be rdy to go Edited February 4, 2007 by Bansh-eman Quote Link to comment Share on other sites More sharing options...
FireHead Posted February 4, 2007 Report Share Posted February 4, 2007 use a tape measure... messure the front and back and set them the same .. then measure top and bottom and set them about 1 inch less on top ...no special tool is needed this will do caster camber and tow picth so then you should be rdy to go Good explanation. :thumbsup: Quote Link to comment Share on other sites More sharing options...
Bairdy13 Posted February 4, 2007 Author Report Share Posted February 4, 2007 Yep exactly as I thought. Cheers. PS: Oh and Bansh-eman.......GOD I LOVE THOSE BOOBS!!! Quote Link to comment Share on other sites More sharing options...
differentstrokes Posted February 4, 2007 Report Share Posted February 4, 2007 Yeah, what he said. :thumbsup: I put ratchet straps from the bars to the pegs and tighten them down once the handlebars are straight, then I adjust everything. I also like to put the bike up on it's grab bar and eyeball everything just to make sure it's good since you see a different angle when it's on the ground. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.