Blue Duece Posted February 8, 2007 Report Share Posted February 8, 2007 Damn I just about spit up!! LOL ".... No.. You dont undastand. Ours goes to eleven." sorry JMD.......im kinda chuckleing myself this is a comical thread........god bless Jason(banchetta)for holding his mug......... Quote Link to comment Share on other sites More sharing options...
Blue Duece Posted February 8, 2007 Report Share Posted February 8, 2007 Banchetta has been a well missed resource around here for a long time.I woke up one day and they had just about every thread in the Jetting and Exhaust forum answered, I nearly shit meself. I thought someone had hacked the account....LOL. As I said in my PM....welcome back stranger, good to have you 'round...again. amen...he's a godsend ive learned sooo much from him.......i think pussie had him occupied for a while............ Quote Link to comment Share on other sites More sharing options...
Banchetta Posted February 8, 2007 Report Share Posted February 8, 2007 amen...he's a godsend ive learned sooo much from him.......i think pussie had him occupied for a while............ lol......the pussie couldn't step up to enough plates for this kid!!!!! Actually I changed from being a lobsterman to a general contractor.....who would think and fisherman could become a carpenter??? lol....Then on top of that, my little baby boy is now almost 3years old....Damn, he got my drive and never stops....talk about a handful. I love every minute though. Next year, he's going to Glamis w/ me. The old lady doesn't like the idea, but thats her problem... Thanks for all the comments guys, I didn't think anyone missed me. Nice to know my knowledge helps others. Its what drives me to be here....JKJK talked me into coming back. We hooked up one day and he asked why I wasn't on anymore..I was busy as hell and didn't feel that I was doing much....John really inspired me to come back. If it wasn't for this board, I would have never met about 50 people on here which a lot of them I still ride w/ across the nation....so I'm back to help give back!!!!!! :cool: :beer: Speaking of which, Duece, you going to Glamis Presidents day??? I'll be there w/ over 70 guys from the east coast from the 12-21... Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 8, 2007 Report Share Posted February 8, 2007 this threads funny. and i agree with all thats been said.. i really just wish mike would drop the name on his miracle builder... Quote Link to comment Share on other sites More sharing options...
Blue Duece Posted February 8, 2007 Report Share Posted February 8, 2007 (edited) lol......the pussie couldn't step up to enough plates for this kid!!!!! Actually I changed from being a lobsterman to a general contractor.....who would think and fisherman could become a carpenter??? lol....Then on top of that, my little baby boy is now almost 3years old....Damn, he got my drive and never stops....talk about a handful. I love every minute though. Next year, he's going to Glamis w/ me. The old lady doesn't like the idea, but thats her problem... Thanks for all the comments guys, I didn't think anyone missed me. Nice to know my knowledge helps others. Its what drives me to be here....JKJK talked me into coming back. We hooked up one day and he asked why I wasn't on anymore..I was busy as hell and didn't feel that I was doing much....John really inspired me to come back. If it wasn't for this board, I would have never met about 50 people on here which a lot of them I still ride w/ across the nation....so I'm back to help give back!!!!!! :cool: :beer: Speaking of which, Duece, you going to Glamis Presidents day??? I'll be there w/ over 70 guys from the east coast from the 12-21... damm so your into carpentry, i started out cutting roofs and stairs in the 70's with my brother now he's a devoloper and im into the studio biz, carpentry is a damm honest proffesion glad to hear it.......Damm your sons 3?, last i heard you were just getting married, gezz time fly's, your comments have been key since day one on the HQ, i remember you turned me on to whacking my swing arm in 02 best fucking thing ive done to my shee's, i should at least drive out and meet you all in the dunes my shee's in a zillion peices, i speed shifted to fourth a few months ago and thought i missed a gear turns out my transmission is granola in the bottom of my case, my buddy is rebuilding it, he's getting cut gears he says it will shift tighter and pull better........ thank god i have a second shee' but its only piped kinda bores me after awhile, damm my son is asking me for pads under his jumps he wants to do back flips on his CR85, his mother wants to shoot me, wait till your son gets older your in for a long fun ride, when your son ask's "hey dad, can i say "fuck" around you" thats when you know your done..........good to see you back, thanks for all your help over the years....jim Edited February 8, 2007 by Blue Duece Quote Link to comment Share on other sites More sharing options...
JKJK Posted February 8, 2007 Report Share Posted February 8, 2007 Jason,Glad to see your back. :thumbsup: Now i have to get Walter back on the bus.I'm on it! :biggrin: Quote Link to comment Share on other sites More sharing options...
dante Posted February 8, 2007 Report Share Posted February 8, 2007 (1) hey dante go head and explain (im kinda dumb) how the fuck do you "over rev" a fucking bike? (is that some kinda Spinal Tap shit where your throttle goes to eleven?, and mine maxes at 10)(2) if you can jett a motor by "ear" (no plug chop, no load on the engine) then id like you to autograph my bible (3) if your ever in california by all means hit me up, ill bet ya pinks i get ya by 10 bikes in a 100 yards (and ill buy the beer and tri-tip) 1. Overrevving - Max out the motor -IE reach the point at where the connecting rod has went beyon the mechcanical capabilities. Like turning 9200 RPM with a motor designed to go 9000, it could strech the connecting rod, Split the crank and/ or the pistion can hit the top of the cylinder. 2. Did I say jet the motor or turn up the idle? STUPID! :thumbsup: when you turn up the idle it's about perfect with that setup he has for bottom end power, when it gets lumpy because of the amount of fuel the carbs are adding it affects take off. It adds low to mid range where he wants the power. Plus some throttle responce. 3. Come to VA oh yea you can bring my new bike (was yours) :yelrotflmao: 4. Just for fun I'll add aboost bottle and can't loose - You don't want that... No serously if you see a boost bottle on my bike don't run it. You have been warned! Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted February 8, 2007 Report Share Posted February 8, 2007 hmm, i think im gonna go turn my idle up to gain some more performance... :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
ellison445 Posted February 8, 2007 Report Share Posted February 8, 2007 Tyler Are you crazy!!!! You mean to tell ma you havent tried that yet hmm, i think im gonna go turn my idle up to gain some more performance... :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted February 8, 2007 Report Share Posted February 8, 2007 man no wounder my cub motor does not have any bottom end! I will have to try this idle trick out. thanks for the heads up! :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted February 8, 2007 Report Share Posted February 8, 2007 man no wounder my cub motor does not have any bottom end! I will have to try this idle trick out. thanks for the heads up! :yelrotflmao: I will leave the idle turned down on my 10 mil, but...if you beat me JT, I'm turning it back up....just for you...LOL Quote Link to comment Share on other sites More sharing options...
jmd0346 Posted February 9, 2007 Report Share Posted February 9, 2007 I will leave the idle turned down on my 10 mil, but...if you beat me JT, I'm turning it back up....just for you...LOL Yeah Id save it for when you really need it. lol! Ive been into Banshee's for 7 years and never heard that one. Quote Link to comment Share on other sites More sharing options...
Blue Duece Posted February 9, 2007 Report Share Posted February 9, 2007 1. Overrevving - Max out the motor -IE reach the point at where the connecting rod has went beyon the mechcanical capabilities. Like turning 9200 RPM with a motor designed to go 9000, it could strech the connecting rod, Split the crank and/ or the pistion can hit the top of the cylinder. 2. Did I say jet the motor or turn up the idle? STUPID! :thumbsup: when you turn up the idle it's about perfect with that setup he has for bottom end power, when it gets lumpy because of the amount of fuel the carbs are adding it affects take off. It adds low to mid range where he wants the power. Plus some throttle responce. 3. Come to VA oh yea you can bring my new bike (was yours) :yelrotflmao: 4. Just for fun I'll add aboost bottle and can't loose - You don't want that... No serously if you see a boost bottle on my bike don't run it. You have been warned! 1. so would that be something i achive in my driveway in neutral, kinda just hold it wide open till the whole fucking bike implodes, or do i just get out in the street and hold first gear wide open till it explodes? now see if you had a welded crank and a decent drag port you could sustain what a drag racer considers "over rev" 2. your whole idle theory reeks of stupidity!!!!!!!! 3. why the fuck would i want to go to Virginia? if i want to breed with my cousin she lives in California 4. i think ill call you "Jethro" from now on...... Quote Link to comment Share on other sites More sharing options...
bansheeseat$$ Posted February 9, 2007 Report Share Posted February 9, 2007 man no wounder my cub motor does not have any bottom end! I will have to try this idle trick out. thanks for the heads up! :yelrotflmao: Crap,This whole time I had two idle screws I could of turned up.Thats twice the power right? :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
Banchetta Posted February 9, 2007 Report Share Posted February 9, 2007 3. why the fuck would i want to go to Virginia? if i want to breed with my cousin she lives in California4. i think ill call you "Jethro" from now on...... Hahahahaha, I almost pissed my pants on that one,, hahahahahha. Shit, I come home after a rough day, turn the computer on, see the new post on this thread and just start reading....hahaha, nothing like a highlight of the day!!!! Banshee$$, Just think if you had the tors kit idle screws AND left the stock idle knobs, then you would have 4 adjustments....THATS RIGHT, I would be the BANSHEE KING!!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.