byebyeshee Posted January 13, 2007 Report Share Posted January 13, 2007 (edited) I'm getting down to the end of this low hour very clean machine. Prices are shipped, email ATCST@Verizon.net for pics Prices include shipping and I ask you to pay the PAYPAL and fee to (ATCST@Verizon.net). These prices are fairly firm, they are right there with parts that aren't nearly as nice and I just want them GONE!!!!!!!!! ***********TRADES************* I could use a NICE AND TIGHT clutch lever assembley and front brake master cylinder with straight tight lever from newer BANSHEE - will trade something.... Also 200X, 350X Honda ATC parts are always welcome. Rear hubs 40$ Front hubs with rotors and good bearings 45$ Rear sprocket hub and lock ring 30$ Rear brake rotor and hub 30$ Stock rear blue fender and cut front, very nice with all labels and OEM stickers 95$ shipped - My shipping cost is alot... All motor mounts and links and other mount and 2 pipe hangers 25$ Flywheel 55$ Left spindle 20$ Left lower a arm 30$ - rubber ripped from moving around my shop - joint is tight, arm straight Clutch cover with wp and wp cover 35$ Swinger and dogbone 50$ - will cost me 15$ to ship White rear shock 80$ Stator cover 15$ Nice not sloppy kicker and shift lever and rear brake lever 50$ Kicker gears, shaft and idler gear 30$ Coil - on/off switch - volt reg and other elec box 50$ Swing arm bolt - great and chain adj and chain sliders 25$ Metal heel guards and pegs 50$ Mint throttle with SS hardware and cable 35$ 2 intakes no cracks and 1 reed block 20$ Airbox and snorkel with lid 25$ Seat latch 10$ Clutch cable and p brake cable 12$ Rear skid - surface rust - no thrashing 22$ Edited January 13, 2007 by byebyeshee Quote Link to comment Share on other sites More sharing options...
Washburn Posted January 14, 2007 Report Share Posted January 14, 2007 2 intakes no cracks and 1 reed block 20$ Were the intakes modified at all or did they have the stock reeds in them? Are the two rubber tips still intact on each manifold with absolutly no cracks/chipping or peeling? Same with the rest of the intake body/ any cracks,splits,chipping? Are the O Rings still in the manifolds? Ill give you the 20 shipped through Paypal to 15201 as soon as you respond if everything checks out. Quote Link to comment Share on other sites More sharing options...
majicmike Posted January 14, 2007 Report Share Posted January 14, 2007 2 intakes no cracks and 1 reed block 20$ Were the intakes modified at all or did they have the stock reeds in them? Are the two rubber tips still intact on each manifold with absolutly no cracks/chipping or peeling? Same with the rest of the intake body/ any cracks,splits,chipping? Are the O Rings still in the manifolds? Ill give you the 20 shipped through Paypal to 15201 as soon as you respond if everything checks out. I want the clutch cover Quote Link to comment Share on other sites More sharing options...
Washburn Posted January 16, 2007 Report Share Posted January 16, 2007 Check your PMs byebyeshee Quote Link to comment Share on other sites More sharing options...
byebyeshee Posted January 19, 2007 Author Report Share Posted January 19, 2007 (edited) Check your PMs byebyeshee Sorry, don't come here often. The intakes are perfect, stock and not modified. Clutch cover is a great bargain. Anyone who wants anything can paypal ATCST@Verizon.net, but please list the part and a good address, thank you!! Edited January 19, 2007 by byebyeshee Quote Link to comment Share on other sites More sharing options...
ClimbAnyHill Posted January 19, 2007 Report Share Posted January 19, 2007 Dibs on the skidplate! Stock or Aftermarket?? Pix to Skratchn1200@aol.com Quote Link to comment Share on other sites More sharing options...
ClimbAnyHill Posted January 19, 2007 Report Share Posted January 19, 2007 Dibs on the skidplate! Stock or Aftermarket?? Pix to Skratchn1200@aol.com Let me see this one too! Swing arm bolt - great and chain adj and chain sliders 25$ Quote Link to comment Share on other sites More sharing options...
Washburn Posted January 19, 2007 Report Share Posted January 19, 2007 Sorry, don't come here often. The intakes are perfect, stock and not modified. . Anyone who wants anything can paypal ATCST@Verizon.net, but please list the part and a good address, thank you!! I bought the Intakes off of another member. Thank you for the offer though. Quote Link to comment Share on other sites More sharing options...
byebyeshee Posted January 20, 2007 Author Report Share Posted January 20, 2007 I bought the Intakes off of another member. Thank you for the offer though. Glad you found one, I just don't get on here fast enough or frequently.... Quote Link to comment Share on other sites More sharing options...
ClimbAnyHill Posted January 20, 2007 Report Share Posted January 20, 2007 Let me see this one too!Swing arm bolt - great and chain adj and chain sliders 25$ I'll skip on this, not what I'm looking for. But for anyone who is, this is the right price & parts look good :thumbsup: Thanks for your fast response & email with pics! Quote Link to comment Share on other sites More sharing options...
byebyeshee Posted January 27, 2007 Author Report Share Posted January 27, 2007 I'll skip on this, not what I'm looking for. But for anyone who is, this is the right price & parts look good :thumbsup: Thanks for your fast response & email with pics! Thanks... Fenders, swing arm bolt, seat latch - sold Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.