sgt seth Posted January 8, 2007 Report Share Posted January 8, 2007 (edited) I am modding my Yamaha Wolverine 350. I am putting a 400cc bbk on it, HMF, K&N with outy, Wolvy Hotcam, Warn 424 and a few other mods. Mickey at FST has a secondary oiler cooler, and I shot a PM to him on Highlifter. He told me he could ship it but I'd have to send my CC numbers over that to him or call, and its impossible to call. So I have been wondering what another good place to order one would be. Any suggestions would be great, since I am getting it all set up to build in March. Thanks guys ----seth Edited January 8, 2007 by sgt seth Quote Link to comment Share on other sites More sharing options...
racer Posted January 8, 2007 Report Share Posted January 8, 2007 i dunno, but id def not be sendin any CC #'s like that. maybe ask him about paypal or money order? Quote Link to comment Share on other sites More sharing options...
okbeast Posted January 8, 2007 Report Share Posted January 8, 2007 Hell no, money order, cashiers check, paypal, anything else man. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 9, 2007 Report Share Posted January 9, 2007 Why dont you just get a small one made for auto engine oil or transmission cooler. Just hook it in line with the factory one on your wolverine. Hose in to your factory oil cooler. Hose coming out of your factory cooler to the car style cooler. Hose going from the auto cooler back to your wolverines engine. Oil Cooler From JEGS LINK Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 9, 2007 Report Share Posted January 9, 2007 Why dont you just get a small one made for auto engine oil or transmission cooler. Just hook it in line with the factory one on your wolverine. Hose in to your factory oil cooler. Hose coming out of your factory cooler to the car style cooler. Hose going from the auto cooler back to your wolverines engine. Oil Cooler From JEGS LINK That's probably what I'd do as well. I've used heater blocks from old chevy blazers in the past for extra cooling and oil cooling. Works great and usually fits down inside your frame too. I'm just find a small transmission cooler and use that instead. Probably cheaper and would do the exact same thing. Quote Link to comment Share on other sites More sharing options...
sgt seth Posted January 9, 2007 Author Report Share Posted January 9, 2007 Okay, so a small transmission cooler? And it will plug straight into the primary lines? If I could find one slightly larger than the stock Wolverine filter I'll be fine, because the secondary oil cooler is usually for stroked Wolvy's.. But going up from an 83mm to an 89mm bore is a big change and want to make sure I dont damage the engine. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 9, 2007 Report Share Posted January 9, 2007 I dont think it would plug driectly in line. Just use new rubber hose and plumb it your self. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.