BansheeDan Posted January 3, 2007 Report Share Posted January 3, 2007 ok heres the deal....i doing a ground up rebuild on a 01 shee. before i pulled the bike down there was a lil slop in the swingarm...not too bad but it was noticeable well after i got it down there is no slop between the outside of the tube and the needle bearings. so my question is do these pivot tubes and bolts wear out and if so where can i get them ? thanx Dan Quote Link to comment Share on other sites More sharing options...
kaotik1 Posted January 3, 2007 Report Share Posted January 3, 2007 I just sold one, there are a couple others here with them for sale as well. You can get them from the dealer and e-bay. Piviot bolt /swing arm bolt Quote Link to comment Share on other sites More sharing options...
wesw Posted January 3, 2007 Report Share Posted January 3, 2007 how much slop are you talking about. you can shim the pivot tube so it doesnt move if needed Quote Link to comment Share on other sites More sharing options...
Dead Op Posted January 5, 2007 Report Share Posted January 5, 2007 Sounds like you need a rebuild kit for your swingarm I got mine for $35 out of the local dealer. Pivot works makes it. Good luck :thumbsup: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.