chase@miamiatv.com Posted January 3, 2007 Report Share Posted January 3, 2007 Parting out my trail banshee Motor is as follows 2001 or 2002 motor ( cant remember ) 20 over www.cpcustoms.com porting (mx trail port) ricky stator 200watt timing plate ( set at 4 degree ) billet hinson clutch basket with vitoz clutch plates ( good clutch ) polished clutch cover with polished center insert billet water impellar shift star mod comes with stock reeds and stock intake boots and cross over tube. add your carbs of choice , pipes of choice and GA GA GA GOOO !!!!!!!!! I cant include the stock plastic stator cover. 1200.oo FIRM shipped Motor is defintly for trails , it has all the power down low on the powerband.... It does pull nice up top too just not as much as say a drag port . Id reccomend some pro circuts or some t-5's something to accomodate the port job. I ran fmf's and it was preety nice .... Starts on the first or second kick with no choke . 125 psi in each cylinder. Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted January 4, 2007 Author Report Share Posted January 4, 2007 bump Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted January 4, 2007 Report Share Posted January 4, 2007 Bump for ya chase! Awesome guy to deal with! If your gonna sell the motor in pieces let me know, I need some of that stuff, just not all of it. Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted January 4, 2007 Author Report Share Posted January 4, 2007 Thanks bud , i will let you know for the part out , i doubt it tho . Quote Link to comment Share on other sites More sharing options...
Lethaface Posted January 5, 2007 Report Share Posted January 5, 2007 Bump! My buddy has the exact same porting setup from CP and it rips! He ended up selling it to my little brother shortly after christmas for his rumbleshee..Awesome running cylinders right there :beer: Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted January 5, 2007 Author Report Share Posted January 5, 2007 bump bump Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted January 7, 2007 Report Share Posted January 7, 2007 Part it out! I'll taker the stator, clutch basket, impeller, shift star, and maybe the cylinders! Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted January 7, 2007 Author Report Share Posted January 7, 2007 its all on ebay Quote Link to comment Share on other sites More sharing options...
LiftdT4R Posted January 7, 2007 Report Share Posted January 7, 2007 All together or parted? Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted January 8, 2007 Author Report Share Posted January 8, 2007 all togheter on ebay do a serach for banshee engines , im sure ull find it Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted January 17, 2007 Author Report Share Posted January 17, 2007 bump Quote Link to comment Share on other sites More sharing options...
Washburn Posted January 17, 2007 Report Share Posted January 17, 2007 Thats one hell of a ported trail motor. CPCoustoms is no joke. Plus the extra mods. Some buffing and checking the engine to your specifications sounds like a tight setup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.