Handyman Posted December 31, 2006 Report Share Posted December 31, 2006 I did a search and found nothing on my question. I went and bought engine ice for my new shee and the guy at the counter said that I HAD to drain all the old fluid out other wise it will f**k s**t up if it mixes. I asked him how it will f**k s**t up and what would happen if the 2 different fluids did mix, He looked at me like I was just asked the most retarded question in the world. If I do have to drain the old fluid and must make sure it's all out how to I flush the entire system before I put Engine Ice in. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Fireman-hott Posted December 31, 2006 Report Share Posted December 31, 2006 Its not ment to be mixed, but a little left over after draining all your fluid isn't going to hurt. Quote Link to comment Share on other sites More sharing options...
theshee Posted December 31, 2006 Report Share Posted December 31, 2006 It wont do anything if its not all flushed out. Get out what you can, and dump it in. I had a little bit of green left in my KFX and it didnt do anything. Quote Link to comment Share on other sites More sharing options...
ClimbAnyHill Posted December 31, 2006 Report Share Posted December 31, 2006 It will gel up if mixed in large portions. Quote Link to comment Share on other sites More sharing options...
differentstrokes Posted December 31, 2006 Report Share Posted December 31, 2006 I flushed mine just to be on the safe side. I ran it with distilled water and a little vinegar and then ran it again with just distilled water. After all that I filled it with the engine ice. Kind of a hassle, but I like to take care of my stuff. Quote Link to comment Share on other sites More sharing options...
theshee Posted December 31, 2006 Report Share Posted December 31, 2006 Thats what I did too diff. Never hurts to be safe on those kinds of things. Just seemed like there was a tiny bit let even after I flushed my KFX out. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted December 31, 2006 Report Share Posted December 31, 2006 I took off the water pump cover, drained all I could...tipped the bike a little, that was it. Don't get too concerned with getting every last drop out, you'll be just fine... Quote Link to comment Share on other sites More sharing options...
Handyman Posted December 31, 2006 Author Report Share Posted December 31, 2006 (edited) Thanks for the help and info. I didn't think that it would hurt if there was little left over but just wanted to be on the safe side and ask. All that is required is one container to fill up the system right?? Edited December 31, 2006 by Handyman Quote Link to comment Share on other sites More sharing options...
differentstrokes Posted January 1, 2007 Report Share Posted January 1, 2007 Yeah, 1 is all it takes and you'll still have some leftover. Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted January 2, 2007 Report Share Posted January 2, 2007 I like the engine ice, but if you have aftermarket heads or cylender's it will take a little more I think.......... :thumbsup: Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted January 2, 2007 Report Share Posted January 2, 2007 I drianed my coolant. Then filled it up with prestone coolant system flush and distilled water. Ran it for a while. Drained that filled it up with just distilled water. Ran it for a little while. Then drained it. You can take out the little bolts out of the cylinders to help drain the excess water out of the cylinders. then just pull the water pump cover. If do the final drain while the shee is still hot it will help get all the water out. One jug was enough for my banshee with my cool head. josh Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 2, 2007 Report Share Posted January 2, 2007 Just run it on methanol. No worries of it getting hot. LOL! :thumbsup: Quote Link to comment Share on other sites More sharing options...
Handyman Posted January 2, 2007 Author Report Share Posted January 2, 2007 Just run it on methanol. No worries of it getting hot. LOL! :thumbsup: For me that would be a huge change, That would be like going from a 4cyl car( My '99) to a Super charged Vette(my '05 if on methonyl)..... baby steps....baby steps :beer: But one day i will get there. Quote Link to comment Share on other sites More sharing options...
moneybags Posted January 2, 2007 Report Share Posted January 2, 2007 I had the clutch cover off cause I put in a new clutch. When I had it off I put the aircompresser hose into the coolent line after I tilted the banshee on its side and blew a lot more coolent out of the system. Dont know if I would reckomend it, Might maby blow a gasket or sompthing. But that is what I did. Quote Link to comment Share on other sites More sharing options...
okbeast Posted January 2, 2007 Report Share Posted January 2, 2007 I had the clutch cover off cause I put in a new clutch. When I had it off I put the aircompresser hose into the coolent line after I tilted the banshee on its side and blew a lot more coolent out of the system. Dont know if I would reckomend it, Might maby blow a gasket or sompthing. But that is what I did. Yeah I accidentally did that with mine a few times and made a damn mess. Don't think it'd hurt anything really. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.