Quadatic20 Posted August 24, 2008 Report Share Posted August 24, 2008 They stopped making tie rods. Yeah, I called Noss today, he said there is someone else making them now (cheaper. He did say that he has had alot of request and may start making them again. Quote Link to comment Share on other sites More sharing options...
96bansheeboi Posted January 31, 2009 Report Share Posted January 31, 2009 Yeah, I called Noss today, he said there is someone else making them now (cheaper. He did say that he has had alot of request and may start making them again. im new to the site and did the install i used raptor shocks and to my research raptor shocks are longer than yfz ones but it looks to me it sits way to low for my liking can i get a few detailed side pics from one of you guys thanks kyle Quote Link to comment Share on other sites More sharing options...
xXBlessedWithDeathXx Posted January 31, 2009 Report Share Posted January 31, 2009 Talk to speedy2222 for tie rods. Quote Link to comment Share on other sites More sharing options...
04sand4 Posted January 31, 2009 Report Share Posted January 31, 2009 I did the 450 converstion and went to yfz ends which are bigger than stock banshee. now im trying to get a plus one tie rod for the yfz from modquad . they dont make a plus one , but they are going to start from what i have been told . im still waiting for mine to show up . Quote Link to comment Share on other sites More sharing options...
Beachcruiser Posted February 9, 2009 Report Share Posted February 9, 2009 I started reading this thread 2 hours ago.....im finally done. haha You guys have convinced me to start looking for some YFZ arms to make the conversion. Thanks Quote Link to comment Share on other sites More sharing options...
mfred_2000 Posted February 17, 2009 Report Share Posted February 17, 2009 I started today bolting up 2004 yfz arm, spindles, calipers, and shocks to my 1998 Banshee. Got one side done, need to make my spacers for the other side, looks like its all gonna be good. I do have some concerns, first, I got a little crazy with the cut off wheel and got into one of the welds a little, (kinda trimmed the top off of it) Second, the tie rods seem short, anyone figure out who is making the rods to order now? I will post pictures, as well as the place I got into the weld, I hit it with a belt sander to see if I could see a color change, looks like there is still good penetration so should be ok I think.... Quote Link to comment Share on other sites More sharing options...
xXBlessedWithDeathXx Posted February 20, 2009 Report Share Posted February 20, 2009 banshee +2 tie rods are needed. Quote Link to comment Share on other sites More sharing options...
Drewski Posted August 9, 2009 Report Share Posted August 9, 2009 grizzly 700 tie rods and ball joints work for this mod. i used the all balls tie rod kit. Quote Link to comment Share on other sites More sharing options...
yfz350rider Posted August 11, 2009 Report Share Posted August 11, 2009 I've been following this and doing the same with my setup. Just waiting for my 450 spindles and i can finish! Thanks for taking the time to do this to make it easier for people like me later! Quote Link to comment Share on other sites More sharing options...
slamed91si Posted September 20, 2009 Report Share Posted September 20, 2009 why do the bottom arms need to be cut they look like they will bolt up maybe i missed it somewhere Quote Link to comment Share on other sites More sharing options...
Drewski Posted September 20, 2009 Report Share Posted September 20, 2009 they just do go back and read it through Quote Link to comment Share on other sites More sharing options...
coumont660 Posted February 13, 2010 Report Share Posted February 13, 2010 does anyone know how much this changes the caster Quote Link to comment Share on other sites More sharing options...
Mullet Man Posted February 16, 2010 Author Report Share Posted February 16, 2010 Almost 3-1/2yrs later and this thread is still going strong....AWESOME! haha Twice as many posts and almost as many views as the YFZ shock thread thats sticky'd and this one still isnt...WTF. Quote Link to comment Share on other sites More sharing options...
MN SHEE Posted February 23, 2010 Report Share Posted February 23, 2010 Has any one tried the 450 long traval shocks with this setup? hope it will work I just baught a set off an 09 will let you know thanks Quote Link to comment Share on other sites More sharing options...
Ederasu Posted March 13, 2010 Report Share Posted March 13, 2010 What are the options for tie rods? Only grizzly 700 rods? It's the last piece to my puzzle Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.