Jump to content

How are these mods on my bike?(just got it)


rynb15

Recommended Posts

I just got my banshee a couple weeks ago. It already has had some work done to it. I have never ridden a banshee before this one and all i can say is that it hauls a$$. Anyway here is whats done to it.

 

its an 02, stock stroke and crank,

.40 wsm pistons that was bored from stock

milled .30 head

stock carb main jet 310,

dirt digger clutch,

full pro circuit exhuast

adj. stator plate set +5

vforce 3 reeds and cages and spacer

boost bottle

powerblades

k&N PODS

 

Any othere little things i should do to it? Im new to the world of the banshee(came from the 4strokes :down: )

 

But with the mods listed do you think it could spank a 450? It sure feels like it would but havent raced one yet. :thanks:

Edited by rynb15
Link to comment
Share on other sites

I just got my banshee a couple weeks ago. It already has had some work done to it. I have never ridden a banshee before this one and all i can say is that it hauls a$$. Anyway here is whats done to it.

 

its an 02, stock stroke and crank,

.40 wsm pistons that was bored from stock

milled .30 head

stock carb main jet 310,

dirt digger clutch,

full pro circuit exhuast

adj. stator plate set +5

vforce 3 reeds and cages and spacer

boost bottle

powerblades

k&N PODS

 

Any othere little things i should do to it? Im new to the world of the banshee(came from the 4strokes :down: )

 

But with the mods listed do you think it could spank a 450? It sure feels like it would but havent raced one yet. :thanks:

 

alot of ppl will say ditch the boost bottle.. but i had one on and it didnt hurt anything... it just doesnt help... if your running a reed spacer pull that thing out theres no advantage to it... they are used to make bigger carbs clear the clutch arm..

 

as far as spanking a 4stroke i dought it but beat it yea if you can ride well... it all depends if they can ride and what they have done ...

Link to comment
Share on other sites

ya i have been reading on here and found the same thing you just said about the bottle and spacer. But it runs fine so ill just leave it in there.

DITCH THE BOOST BOTTLE (BLOCK EM OFF) PULL THOSE SPACERS AND BUZZ THAT LIP OUTTA THOSE STOCK INTAKES WITH A DREMEL WITH A SANDING DRUM BIT AND YOULL SEE A CHANGE

 

DITCH THE BOOST BOTTLE (BLOCK EM OFF) PULL THOSE SPACERS AND BUZZ THAT LIP OUTTA THOSE STOCK INTAKES WITH A DREMEL WITH A SANDING DRUM BIT AND YOULL SEE A CHANGE

OHH AND IF IT WAS ME ID BACK THAT TIMING DOWN TO 3 OR 4 JUST TO PLAY IT SAFE TIMING IS HELL ON THESE THINGS

Link to comment
Share on other sites

If your bike is running right with 310s it should blow away a 450 no contest.

BUT: been hearing lots bad about WSM pistons and WHY THE F... would someone bore stock cyls 40 over? -Just took several lifetimes off em. Otherwise sounds like a decent ride if the maint. has been kept up.

Link to comment
Share on other sites

If your bike is running right with 310s it should blow away a 450 no contest.

BUT: been hearing lots bad about WSM pistons and WHY THE F... would someone bore stock cyls 40 over? -Just took several lifetimes off em. Otherwise sounds like a decent ride if the maint. has been kept up.

 

thats just what the guy told me. But it hasent been to long since the guy built it. earler this year. But it does run pefect.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...