banshee223 Posted September 30, 2006 Report Share Posted September 30, 2006 I was wondering if they make different inserts for these to change the bolt pattern. If so, where could I order some from? Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted September 30, 2006 Report Share Posted September 30, 2006 mine have bolt patterns for yamaha banshee, 450, warrior, raptor etc..and honda 400ex i think... Quote Link to comment Share on other sites More sharing options...
banshee223 Posted September 30, 2006 Author Report Share Posted September 30, 2006 (edited) Yea mine are for banshee,warrior,raptor ect..., but I have found a set cheap and was needing to change them to a suzuki pattern to run on my ltr450 Edited September 30, 2006 by banshee223 Quote Link to comment Share on other sites More sharing options...
pipebomb Posted September 30, 2006 Report Share Posted September 30, 2006 careful w/ them, there was a recall on them a few months back for the aluminum centers cracking between the stud holes. as for the inserts, call HiPer and find out. have the phone, just not immediately at hand. I'll get it later if no one gets it up by then. mine have bolt patterns for yamaha banshee, 450, warrior, raptor etc..and honda 400ex i think... unless you swapped the hubs for use a honda pattern, the ones u have don't fit the 400EX. almost all honda sport quads and few Zuki's use a 4/110 rear pattern . meaning you can use hoda rims on some Zuk's and vice versa. the Z400and most hondas use a 4/144 front as well. haven't had any dealings w/ the new LTR450, so I don't know about those yet. Quote Link to comment Share on other sites More sharing options...
banshee223 Posted September 30, 2006 Author Report Share Posted September 30, 2006 On the ltr450 the front is 4/144 and the rear is 4/110 Quote Link to comment Share on other sites More sharing options...
banshee223 Posted September 30, 2006 Author Report Share Posted September 30, 2006 Yea, I was just wondering where to the center piece for the wheels because the bolt pattern is for the yamahas like the banshee and I was wondering if I could just change the center piece out and where to get them at. I looked on Hi-pers web site and didn't find anything. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted September 30, 2006 Report Share Posted September 30, 2006 unless you swapped the hubs for use a honda pattern, the ones u have don't fit the 400EX. my rear wheels have 2 different sets of holes on them. one fits the yamaha rear bolt pattern and the other is slightly smaller. i figured it was honda bolt pattern..the fronts only have one set of holes. Quote Link to comment Share on other sites More sharing options...
banshee223 Posted September 30, 2006 Author Report Share Posted September 30, 2006 ok thanks alot guys for the help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.