robin banx Posted September 22, 2006 Report Share Posted September 22, 2006 i have a 2000 banshee with fmf pipes, jet, k&n, reed spacers, .100 forged pistons, boost bottle, +3 ign. key, billet water pump. the next rebuild will be a 404 kit with porting, i was looking for a good head and don't know who to turn to. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 22, 2006 Report Share Posted September 22, 2006 NOSS Machine all the way (cool head) PM DLNoss here. He's site member...and will give a small discount for banshee HQ members. Not to mention, Dave's just a helluva nice guy. Here's his goods: http://www.nossmachine.com/banshee_heads.htm Quote Link to comment Share on other sites More sharing options...
odaen Posted September 22, 2006 Report Share Posted September 22, 2006 Wes gives the best head. Err, actually, I think RK-Tek heads are the best head on the market, but the NOSS is a better value. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 22, 2006 Report Share Posted September 22, 2006 At .100 over...odaen...he needs to save some money for that big bore kit... Robin... before you go with a 404 kit, look into a cheetah cub setup as well... Quote Link to comment Share on other sites More sharing options...
dlnoss Posted September 22, 2006 Report Share Posted September 22, 2006 odaen, The head in your sig looks kinda like a Noss head,,,,but my eyes aren't so good anymore... Quote Link to comment Share on other sites More sharing options...
odaen Posted September 22, 2006 Report Share Posted September 22, 2006 odaen, The head in your sig looks kinda like a Noss head,,,,but my eyes aren't so good anymore... You are correct, Sir! (in my best Ed McMahon). Cameron sells a ton of them, and recommends them highly too. Quote Link to comment Share on other sites More sharing options...
dlnoss Posted September 22, 2006 Report Share Posted September 22, 2006 I'm just giving you a hard time. I'm glad you have that picture there. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 22, 2006 Report Share Posted September 22, 2006 Those RK tech heads do look cool...I must admit. But, Dave's service is top notch, top quality...and, I'm sure his domes, being interchangeable, are much more readily available in different cc's and bore sizes.... Plus...Dave's a site supporter and his advice is priceless.... :beer: Quote Link to comment Share on other sites More sharing options...
odaen Posted September 22, 2006 Report Share Posted September 22, 2006 I'm just giving you a hard time. I'm glad you have that picture there. The original question was which head is the best, not which one would you buy. I ran stock carbs on my 4mm motor, because I'm cheap as hell and they performed very nice as is. So, if I were to buy one for my motor brand-new, it would for certain be a NOSS because it is a far better value. Hoping you didn't take my RK Tek recommendation as a jab. Your head and customer service is top notch, Mr Noss. Quote Link to comment Share on other sites More sharing options...
dlnoss Posted September 23, 2006 Report Share Posted September 23, 2006 Not at all. RK Tek has a loyal following and obviously does good work. My Banshee Head business has grown a lot in the last few years, and with the Cubs, the custom dome business has really grown. I bought a new CNC lathe two months ago so I can dedicate one CNC lathe to making Banshee domes and turn them pretty quick. Now the Super Cubs are looking like they may take off and their domes are totally different with the bigger bore size. I'm not offended at all that you like RK Tek heads. I constantly strive to improve my product and customer service and appreciate the support I get on the HQ. -David Quote Link to comment Share on other sites More sharing options...
RNBRAD Posted September 23, 2006 Report Share Posted September 23, 2006 Dave are you planning on making a complete head for the super cub or just domes? Quote Link to comment Share on other sites More sharing options...
dlnoss Posted September 23, 2006 Report Share Posted September 23, 2006 I'm making the heads and domes. There aren't many out there so far. McCoy's, Redline, and Cascade are the only one's I know of. Quote Link to comment Share on other sites More sharing options...
reded Posted September 23, 2006 Report Share Posted September 23, 2006 Calvin needs to leave well enough alone with this cylinder biz. I'm gonna end up having to build a SuperCub. Good Times! Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted September 23, 2006 Report Share Posted September 23, 2006 Calvin needs to leave well enough alone with this cylinder biz. I'm gonna end up having to build a SuperCub. Good Times! yep. the atv industry is becoming the next computer industry. its already old news by the time u get it.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.