Bubba Wrx Posted September 22, 2006 Report Share Posted September 22, 2006 (edited) disreguard my last comment, id just like to say, Diamond racing does absolutley the worst porting ive ever seen, they dont even rinse the metal particles out of the cylinder when theyre done porting, NEVER get any work done by them! :: :: :: :: :: they made my face look like THIS! Edited September 22, 2006 by Bubba Wrx Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 22, 2006 Report Share Posted September 22, 2006 A brand new cylinder out of the box needs the white glove inspection... In other words...wash it completely with soapy warm water, rinse, dry...and use a white cloth on the insides of the cylinders to see if ANY material or gray matter comes off it. If it does, wash her again... I've never heard of or seen Diamond Performance...but, you can't discredit a builder cause they didn't wash your cylinders for you....What happens if you got them home and the inside was rusty from being in open air for a few days. That would've been their fault too??? I"m sure they wiped it off with a rag, might have even hit it with an air nozzle...but, the final cleaning before installation is on you...bud. Sorry... Quote Link to comment Share on other sites More sharing options...
Bubba_wrx Posted September 22, 2006 Report Share Posted September 22, 2006 (edited) WTF! Look guys, if you'll notice that profile only has one post....if you look at my profile ..."bubba_wrx"....NOT "Bubba Wrx". I've been a member on this site for a week or so now. I've got like 30-40 posts i think. This is some dumbass that I banned from PB(I am an admin/Mod over there). His name on there was (Dr. Chronic, B-Rad, #1 Diddler, hes made multiple accounts after we ban one) His actual name is Brad something. He's got AOL and DSL so he gets a new IP address everytime he gets on his PC so we havent been able to completly ban him. He's just pissed off because we banned him on there. Sidenote* If'll you'll look in the Forum Trash section on PB, you'll see a thread he started a bunch of BS about me and posted some pic, but it has already been edited. It says something to the effect of "LOOK AT THIS MONSTER". I appologize for his ignorance and by no means would or have any reason to be starting crap like that with Diamond Racing nor anyone on BansheeHQ. If you want to PM any of the mods over at PB, they'll tell you the same about all the crap that he has done/started since he's been banned. If you'll search for me! "bubba_wrx" you'll see that i have been a member for a week or so now, and havent(that i know have) started or tried to start any problems in the least. Edited September 22, 2006 by Bubba_wrx Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 22, 2006 Report Share Posted September 22, 2006 Thanks for the heads up... Just what this site needed....Ronnie Sheppick's brother. great.... :: :: Quote Link to comment Share on other sites More sharing options...
Dr. Chronic Posted September 22, 2006 Report Share Posted September 22, 2006 you know, you really shouldnt blame everything on me, brian showed me this from the post that was on PB, and honestly, i had nothing to do with this, and i didnt have anything to do with whatever pic youre talking about, the last name i had on pb was kx_blaster, i have another one now, but i havent posted with it yet, had it about 3 days i guess Quote Link to comment Share on other sites More sharing options...
Bubba_wrx Posted September 22, 2006 Report Share Posted September 22, 2006 (edited) Because your the only person that has made over 5(that I know of) accts just trying to start crap on PB. No one else has any reason to post something like this about me, and if they do....then honestly it cant be much more than some young punk that needs to grow up. I'm done posting, its not worth argueing over or getting banned. Edited September 22, 2006 by Bubba_wrx Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 22, 2006 Report Share Posted September 22, 2006 If you've come here to start trouble, you've come to the wrong place. Starting out by using two different screen names with 1 post each is not going to land you any favors here.... DO NOT bring your problems and other baggage here from another site just to get exposure... I suggest you watch yourself, very, very carefully.... Quote Link to comment Share on other sites More sharing options...
Lee Posted September 22, 2006 Report Share Posted September 22, 2006 If you're here to start shit.. I'm on to you. .. .. .. "B-rad" Just a warning. Quote Link to comment Share on other sites More sharing options...
Wiseco Posted September 22, 2006 Report Share Posted September 22, 2006 Hey Everyone , im admin on ProjectBlaster.com We had alot of problem with 2 members the first one is Dr.Kronic/B-Rad and the other one was Darkside. They are both posting Bubba's pic everywhere and talking shit about us and they try to start wars between us and some other site. Project Blaster And Diamond Racing have been working together for ever. PB always supported Diamond Racing and Diamond Racing always supported PB. And actually , PB and Diamond Racing are affiliated on all the Big Bore kits and fire breather and what not. I myself have a Diamond Racing motor and diamond racing A-arms and i couldnt be happier with other brands. Any member of the PB staff would never say anything bad about diamond racing and we would never start shit with you guys because we actually love your site , me and bubba are both reading and looking at the pics in here everyday. So if you see anything wrong going on between BansheeHQ and PB please let us know and we will try to find whos the moron trying to start shit again! Once again we are sorry that some (stupid people that shouldnt have the right to use the internet) came here to start shit , we are still trying to Ban them for good but its such a pain in the ass when they can use proxy but we will try what you said and hope it will work for good. Thanks and sorry again! (by the way , you guys got some kickass banshees lol) :beer: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 29, 2006 Report Share Posted September 29, 2006 Sorry to dig this up...but, some little scumbag is using my name over at project blaster.com. Not me boys.... I signed up just now as theREAL_dajogejr, but the thread is locked and I can't defend myself. I think if any of you that know me know I don't go trolling around...this just aggravates me.... Quote Link to comment Share on other sites More sharing options...
Bubba_wrx Posted September 29, 2006 Report Share Posted September 29, 2006 Hey man, We(us at PB) know it wasnt you. The account he made(posing to be you) wasnt actually stirring up trouble. He was actually just posing to be you, trying to make it like you were pissed cuz I(actually him) had made this thread or whatever. Saying to keep the crap on our own forums and stuff. I'm sure I probably caught you offgaurd with that first Pm I sent you explaing all this BS. But anyways, No problem man. And I'm sorry that this moron has pretended to be you and dragged his crap over here. I'm sure he was just trying to start a fuied(sp?) between BHQ and Project Blaster just like he did between Project Blaster and Planet Blaster. Again I appologize for this dudes behavior and being a moron. Hope theres no hard feelings between us and Project Blaster. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 29, 2006 Report Share Posted September 29, 2006 None between us whatsoever...it's all good! :beer: Quote Link to comment Share on other sites More sharing options...
rocketboy Posted September 30, 2006 Report Share Posted September 30, 2006 this has to be the stupidest thread ive ever read on here . Dude.. its up to the customer to clean the honing grit out of your cylinder and wipe it/blow it out really good ,i know I clean them out when im done porting or honing but theres always a little debris/ honing grit that really needs to be addresses by the customer before installation. I dont think its fair to say dimaond did you wrong and how do yo uknow what good porting is ? if your that knowledgable o n the subject why didnt you port it your damn self then ? why dont yo u run the bike instead of your mouth and see . i cant belive people have nothing better to do in life than disguise themselves as other memebrs and play keyboard racers on different sites ,how fuckin old are you ? thats so lame and pathetic Quote Link to comment Share on other sites More sharing options...
Bubba_wrx Posted September 30, 2006 Report Share Posted September 30, 2006 this has to be the stupidest thread ive ever read on here . Dude.. its up to the customer to clean the honing grit out of your cylinder and wipe it/blow it out really good ,i know I clean them out when im done porting or honing but theres always a little debris/ honing grit that really needs to be addresses by the customer before installation. I dont think its fair to say dimaond did you wrong and how do yo uknow what good porting is ? if your that knowledgable o n the subject why didnt you port it your damn self then ? why dont yo u run the bike instead of your mouth and see . i cant belive people have nothing better to do in life than disguise themselves as other memebrs and play keyboard racers on different sites ,how fuckin old are you ? thats so lame and pathetic First off, yes I do agree with you.....This dude has absolutely no life, is definetly a dumbass, and definetly lame and VERY pathetic. And to beat it all...he's 17! Second, this dude has never dealt with Diamond Racing period, and has never dealt with anything to do with porting at all. The only reason he started this thread was to try to get me(the REAL Bubba_wrx) to look bad and try to start some shit. If you'll look at his name and mine....his hasnt got the underscore between Bubba and Wrx like mine. Like has already been stated, I am an admin over at Project Blaster and this is a retard that we've banned...and he's pissed about it and has been trying to start trouble ever since(copying a pic of me from Project Blaster and posting it on here to be a complete retard). You would not believe to some of the lengths he's went to to start trouble or just to try to piss the admins off at PB. I have been posting on BHQ for probably about a month now because I joined this site to gain some knowledge on shees because as you can see in my sig...I'm wanting to dump the blaster and move up to a banshee. So, I again appologize that this dude has brought his BS over here and tried to start shit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.