ausbanshee Posted September 20, 2006 Report Share Posted September 20, 2006 (edited) Put a bid in on these, but cant seem to find much info on them any where any ideas??? http://cgi.ebay.com/ebaymotors/NEW-unused-...030785757QQrdZ1 Edited September 20, 2006 by ausbanshee Quote Link to comment Share on other sites More sharing options...
Big Blue Posted September 20, 2006 Report Share Posted September 20, 2006 Shearer inframes, excellent top end pipe. I have a feeling this guy is going to want to much so here are some other options. http://motors.search.ebay.com/search/searc...earch&fgtp= Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 20, 2006 Report Share Posted September 20, 2006 Great pipes...I got them. RDZ and Shearer inframes are the same pipe...silencer design is a little different, though...not much. RDZ no longer makes inframes that I know of. You can get SHOW Chrome Shearer inframes for cheaper than 750 like this guy is claiming he paid for them..although, if he bought them from RDZ, he might have paid that much. I think they're around 450 new in bare metal, and another 150 for show chrome, but I'm not 100% positive on that. I have show chrome...it is nice. I saw their standard Chrome, ok...but, not great. aubanshee....what is done to your banshee? Just to help you out, these are top end (high RPM) drag orientated pipes. So, they make a lot of power, but...in a very narrow RPM range. Not what you want for trail riding....and they work much better on a ported motor with bigger than stock carbs. Quote Link to comment Share on other sites More sharing options...
ausbanshee Posted September 21, 2006 Author Report Share Posted September 21, 2006 aubanshee....what is done to your banshee? Just to help you out, these are top end (high RPM) drag orientated pipes. So, they make a lot of power, but...in a very narrow RPM range. Not what you want for trail riding....and they work much better on a ported motor with bigger than stock carbs. absolutely nothing actually... lol... just a couple of clamp on k&n's jetted to suit, but i wass planning on keppin my bike sorta MXish, with a bit of top and... any advice on what pipes i should be after??? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 21, 2006 Report Share Posted September 21, 2006 Any pipe is worlds different than stock.... If you got CPIs for MXish, you'd be dissapointed, I think. My favorite non-drag pipe are Toomey T5s. They don't do any one thing the best, but they do everything very well. FMF Fatty's would be my next choice... Quote Link to comment Share on other sites More sharing options...
ausbanshee Posted September 21, 2006 Author Report Share Posted September 21, 2006 sounds good, thanks for the help.... :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 21, 2006 Report Share Posted September 21, 2006 aubanshee....don't just take my advice on this. Do a search on banshee pipes on this forum.... Pipes are like favorite cars, there's a ton of info on here....just cumulate what you read and make your own conslusion.... Quote Link to comment Share on other sites More sharing options...
J-Madd Posted September 21, 2006 Report Share Posted September 21, 2006 FMF SSTs are good MX pipes. Good throttle response and midrange, but fall off a little sooner than T5s. Quote Link to comment Share on other sites More sharing options...
apbt549 Posted September 22, 2006 Report Share Posted September 22, 2006 i like the paul turner mids better then the T5's.....the pt mids seem to have more mid range snap to them.........like was already said pipes are like cars everybody has there favorite...... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.