jay shafer Posted September 19, 2006 Report Share Posted September 19, 2006 Y would a pretty well know builder or shop charge $330.00 for trenching cases for a banshee, when other well known builders charge like 50 to 125? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 19, 2006 Report Share Posted September 19, 2006 Y would a pretty well know builder or shop charge $330.00 for trenching cases for a banshee, when other well known builders charge like 50 to 125? 1st....does the 330 include dissasembly of the motor and reassembly...than yes. If it's just you bringing in the lower half and for machine work only, 330 is a rip. You answered your own question....the guy doesn't realize or know you're sharp enough to shop around when his price is 3 to 4 times what other shops charge. I've NEVER seen it done for 50....but, 100 to 150 is probably the average... Quote Link to comment Share on other sites More sharing options...
jay shafer Posted September 19, 2006 Author Report Share Posted September 19, 2006 Stroker Motors Stroker Cranks........................................................................................Call Case Trenching (7-12)............................................................................$550.00 Case Trenching (14-18)..........................................................................CAll i just called again to make sure and he said he made a mistake and went to 200 for a 7 and 350 for a 10mm despite what he has on his website. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted September 20, 2006 Report Share Posted September 20, 2006 thats fuckin ridiculous...one of the best builders in the world trenched my cases for my 10mm and charged me 100 bucks... Quote Link to comment Share on other sites More sharing options...
SimplyWired Posted September 20, 2006 Report Share Posted September 20, 2006 Might just be his way of politely saying he doesn't want to do it. Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted September 20, 2006 Report Share Posted September 20, 2006 That does seem a little outrageous.................... :beer: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 20, 2006 Report Share Posted September 20, 2006 Jay...you have some work done by FAST. I would bet my left nut Jeff is no where NEAR 330 for case trenching...why don't you just call him and see what he says. Few will argue Dave Moore is one of the best names in the sport. He's seen and done it all...and his work is TOP NOTCH. ON his website, banshee case trenching, 120. http://www.davemooreracing.com/case_mods.php Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted September 20, 2006 Report Share Posted September 20, 2006 Jay...you have some work done by FAST. I would bet my left nut Jeff is no where NEAR 330 for case trenching...why don't you just call him and see what he says. Few will argue Dave Moore is one of the best names in the sport. He's seen and done it all...and his work is TOP NOTCH. ON his website, banshee case trenching, 120. http://www.davemooreracing.com/case_mods.php dave moore is who i was referring to in my post. im almost positive he didnt charge me 120..his work is excellent and you can bet your ass itll be perfect.. Quote Link to comment Share on other sites More sharing options...
bansheeryder_69 Posted September 20, 2006 Report Share Posted September 20, 2006 screw it. A dremmel tool and some bits at wal-mart would run you around $50 and you can trench all you want If you want though i can hook you up with some trenching for $150 from a local guy. Quote Link to comment Share on other sites More sharing options...
jay shafer Posted September 20, 2006 Author Report Share Posted September 20, 2006 screw it. A dremmel tool and some bits at wal-mart would run you around $50 and you can trench all you want If you want though i can hook you up with some trenching for $150 from a local guy. I had just went across their website and seen that and decided to call to see if it was correct and it was. Jeff gave me a good price for whenever i want it done. I just had to call that out b/c of how rediculously high it was and some people are paying that high azz price. The place is in Denham Springs Louisiana. Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted September 20, 2006 Report Share Posted September 20, 2006 screw it. A dremmel tool and some bits at wal-mart would run you around $50 and you can trench all you want If you want though i can hook you up with some trenching for $150 from a local guy. This $150 trenching guy you are referring to, he isn't the one that bought the dremmel and uses it for trenching is it................. :yelrotflmao: Quote Link to comment Share on other sites More sharing options...
bansheeryder_69 Posted September 21, 2006 Report Share Posted September 21, 2006 MAYBE Quote Link to comment Share on other sites More sharing options...
Big Blue Posted September 21, 2006 Report Share Posted September 21, 2006 Anyone know a place that will trench for a 10mm and bore the top case out for a larger bore for a decent price? Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 21, 2006 Report Share Posted September 21, 2006 Dave Moore Racing.... Quote Link to comment Share on other sites More sharing options...
Big Blue Posted September 21, 2006 Report Share Posted September 21, 2006 everytime when I have the money and I get ahold of them they arent taking any work so I just gave up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.