Guest WICKED ATV Posted September 16, 2006 Report Share Posted September 16, 2006 what are some of u 4mm asphalt cub riders running in the 1/8 mile please include how your bike is setup MAX HP- alky-race-pump , carb size, pipes, porting type if any, the builder. Trying to get an idea what to go with was going for a 10mm but may go with the 4mm. they sound pretty tuff! Quote Link to comment Share on other sites More sharing options...
Big Blue Posted September 16, 2006 Report Share Posted September 16, 2006 There is alot of info on 4mm cubs on Plantetsand. Quote Link to comment Share on other sites More sharing options...
reded Posted September 16, 2006 Report Share Posted September 16, 2006 (edited) I dont know about asphalt but I've got a 4mil cub that can put an ass whippin on a few 10mils in 300 ft sand drags. The only downfall I can see to the 4mil in 1/8th mile would be that it wouldnt have the torque to pull as tall of a gear as the bigger motors. Edited September 16, 2006 by reded Quote Link to comment Share on other sites More sharing options...
Big Blue Posted September 16, 2006 Report Share Posted September 16, 2006 Bigboybanshee 350 seems to pull enough gear for the 1/8th but anything past that I would think tq would have an advantage. Quote Link to comment Share on other sites More sharing options...
bigscary Posted September 16, 2006 Report Share Posted September 16, 2006 what are some of u 4mm asphalt cub riders running in the 1/8 mile please include how your bike is setup MAX HP- alky-race-pump , carb size, pipes, porting type if any, the builder. Trying to get an idea what to go with was going for a 10mm but may go with the 4mm. they sound pretty tuff! there are 4mm cubs running 6.2's in the 1/8th......N/A with 5 speed overrides....... just go over to planetsand.....more information than you can read in a month......... Quote Link to comment Share on other sites More sharing options...
race-a-holic Posted September 17, 2006 Report Share Posted September 17, 2006 Bigboybanshee 350 seems to pull enough gear for the 1/8th but anything past that I would think tq would have an advantage. My alcohol stock cylinder(F.A.S.T) 350 has no problem pulling the 1/8th mile.Plenty of power when I cross the finishline.I run an 18/38 gearing.There is some very fast 4 mils out there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.