Bill Posted September 14, 2006 Report Share Posted September 14, 2006 Hey,how do you get the roller bearings out of the swingarm without damaging them.The bearings where the swingarm bolt goes.thanks Quote Link to comment Share on other sites More sharing options...
CFM Posted September 15, 2006 Report Share Posted September 15, 2006 Hey,how do you get the roller bearings out of the swingarm without damaging them.The bearings where the swingarm bolt goes.thanks Don't bother trying, just replace them. PM me and I'll get you a set at my cost --Scott Quote Link to comment Share on other sites More sharing options...
endofitall9 Posted September 15, 2006 Report Share Posted September 15, 2006 ltake the swingarm bolt out. remove the swingarm and the bearing should come right out with now prob.unless they are in bad shape that is. Quote Link to comment Share on other sites More sharing options...
Bill Posted September 15, 2006 Author Report Share Posted September 15, 2006 Well lets say there not budging,sooo do I pound them out? Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted September 15, 2006 Report Share Posted September 15, 2006 its not a bad idea to buy a bearing remover kit they cost like 50 bucks but hey are great. and work for most sizes Quote Link to comment Share on other sites More sharing options...
dajogejr Posted September 15, 2006 Report Share Posted September 15, 2006 You're going to spend an hour pounding them out, heating it up...etc., only to realize you damaged them and can't reuse them. The bearing and seal kit is about 50 bucks...trust me, it's worth it!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.