RIPPEN Posted August 25, 2006 Report Share Posted August 25, 2006 I pulled my reeds out to look a few things over and figured this would be a good time to pick up a presser test kit.. I just read here recently that a member makes them to sell but I was unable to locate that post where I read it originaly. Iam trying to get a hold of one fast so any help would be appreciated.. Thanks! RIPPEN Quote Link to comment Share on other sites More sharing options...
ThE_BaNsHeE_mAn88 Posted August 25, 2006 Report Share Posted August 25, 2006 my dad bought one from matco. he works on planes so the matco truck comes by every week but i dont know were you could get one other then from the truck. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted August 25, 2006 Report Share Posted August 25, 2006 I pulled my reeds out to look a few things over and figured this would be a good time to pick up a presser test kit.. I just read here recently that a member makes them to sell but I was unable to locate that post where I read it originaly. Iam trying to get a hold of one fast so any help would be appreciated.. Thanks! RIPPEN Jump over to dunereview and there is a guy over there who built his own with parts from home depot or some shit, worked great. I say just blow some air in there and stick your thumb in the spark plug hole. If your ears pop when you blow, its good. :baseball_bat: Have you had any reason to think its leaking? When you comming to KP biach? Quote Link to comment Share on other sites More sharing options...
ScreamingLiL2Stroke Posted August 25, 2006 Report Share Posted August 25, 2006 I built my own i used a guage from a broken manifold pressure guage i had laying around,some pvc pipe, a pvc pipe end cap some jb weld to seal it tight a 2 dollar chrome valve stem for a cars rims and i bought a few of the rubber expandable freeze plugs at pep boys for like a 1.89 a pop total cost to build it was like 12 bucks and it works great just have to use a guage that reads low pressure bewteen 0 and 10,the small pice of pvc pipe is threaded on both ends so another piece can be added for clearance issues. heres the one i built with the rubber freeze plug for a blaster Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted August 25, 2006 Report Share Posted August 25, 2006 You may also get a hold of Jeff at FAST, because I know he does a leak-down test on all the motors before he sends them out. He may be able to get you one................ :beer: Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted August 25, 2006 Report Share Posted August 25, 2006 You may also get a hold of Jeff at FAST, because I know he does a leak-down test on all the motors before he sends them out. He may be able to get you one................ :beer: Yeah i can but the Motion pro unit is alittle pricey. Screamin's lil kit looks pretty nice, as well i think RnBrad built one too didnt he? Everything still look ok in there Rippen? :thumb: Quote Link to comment Share on other sites More sharing options...
ScreamingLiL2Stroke Posted August 25, 2006 Report Share Posted August 25, 2006 Motion pro wants a arm and a leg for one,build it yourself its simple. Quote Link to comment Share on other sites More sharing options...
RIPPEN Posted August 26, 2006 Author Report Share Posted August 26, 2006 Jump over to dunereview and there is a guy over there who built his own with parts from home depot or some shit, worked great. I say just blow some air in there and stick your thumb in the spark plug hole. If your ears pop when you blow, its good. :baseball_bat: Have you had any reason to think its leaking? When you comming to KP biach? Na, no reason to belive its leaking... Just like to have stuff like that checked out for peice of mind. Yeah i can but the Motion pro unit is alittle pricey. Screamin's lil kit looks pretty nice, as well i think RnBrad built one too didnt he? Everything still look ok in there Rippen? :thumb: Everything looks awsome man Just want to make sure I get it sealed up as well as you did... Guess I should do something different when Iam bored rather than dink around with the bike :yelrotflmao: Motion pro wants a arm and a leg for one,build it yourself its simple. Guess I may have to build one... That post I read recently said dude builds'em for not a whole lot more than you can and it saves you from running all over finding the crap... Thanks for the info.. RIPPEN Quote Link to comment Share on other sites More sharing options...
ScreamingLiL2Stroke Posted August 26, 2006 Report Share Posted August 26, 2006 I beleive u could prolly get everything u need from home depot exceppt the tire valve and the freeze plugs home depot prolly sells some sorta low pressure guage in there plumbing department. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted August 26, 2006 Report Share Posted August 26, 2006 I don't know why you are wasting time and money on it, just blow into the sucker with your thumb in the spark plug hole. Duh. Ha Ha! How's those 17's looking I gave you? The ones I cut myself are around 15-16cc. I love it. Ha Ha! Let me know when you go to walden again, I want to meet you up there so we can hang out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.