SandShots Posted August 19, 2006 Report Share Posted August 19, 2006 Tomorrow we're working on brothers shee to replace the old chain roller thats all gone to shit. its almost down to the metal ring? any tips on what works best or what you removed first? like leave the tires on/off? thanks for the help. Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted August 19, 2006 Report Share Posted August 19, 2006 they make chain rollers that you dont have to take the hole thing apart to install them..... the way i would do it would be to remove the chain , undo swingarm bolt and rear break line, and then continue to replace chain thing as needed. Quote Link to comment Share on other sites More sharing options...
dawarriorman Posted August 19, 2006 Report Share Posted August 19, 2006 Get a chain slider to replace it with. UPP makes one I know. The one I got is TM designworks. Big beefy, and supposedly lasts forever. Quote Link to comment Share on other sites More sharing options...
gregbowler Posted August 19, 2006 Report Share Posted August 19, 2006 Here's the UPP kit : http://www.magicracing.com/UPP-Chain-Slide...p_703-1058.html Quote Link to comment Share on other sites More sharing options...
SandShots Posted August 19, 2006 Author Report Share Posted August 19, 2006 they make chain rollers that you dont have to take the hole thing apart to install them..... the way i would do it would be to remove the chain , undo swingarm bolt and rear break line, and then continue to replace chain thing as needed. to install an aftermarket roller you need to remove the old one including the metal ring thats in it, i'll take a picture and post it tomorrow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.