99Banshee Posted August 15, 2006 Report Share Posted August 15, 2006 Im having problems with them filter pipes i have on my carbs, filters wont fit because they hit on the pipes.. Well I seen someone on here ( Looking for that person for help) that had a custom pieace of pipe they added so they could fit the filtters right on the carb's.. I need to talk with this person for maybe some help.. Thanks alot guys ~Rich Quote Link to comment Share on other sites More sharing options...
dajogejr Posted August 15, 2006 Report Share Posted August 15, 2006 You can make some intakes...or, just get heat sheilds from Cascade to go over the stinger tubes: http://webforce.nwrain.net/founder/cascade...ORE_DEPT_ID=168 Quote Link to comment Share on other sites More sharing options...
99Banshee Posted August 15, 2006 Author Report Share Posted August 15, 2006 the filters wont fit in between the pipes, i need something that will push the silencers back alittle that way there is enough room for the K&N's Quote Link to comment Share on other sites More sharing options...
dajogejr Posted August 15, 2006 Report Share Posted August 15, 2006 99shee...I'm not trying to sound like a jerk, but...I'd bet my money that long of an intake tract is hurting a little performance on that bike... I think the heat shields are a better choice... Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted August 15, 2006 Report Share Posted August 15, 2006 Would filters that have an angled base make the filters fit ok. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted August 15, 2006 Report Share Posted August 15, 2006 I can only speak from my experience.... I have 35PWKs. I HAD Toomeys, which...look similar in design to the FMF routing. I have angled K&Ns I bought from FAST Racing. No matter what I did, short of building long intake tracts like you see above, they would not clear the pipe. I even had a thing steel strap holding the pipe against the frame. Once I saw the pipe design of the RDZ/Shearer inframes, I was sold. Not only are they a great pipe for my application...they actually put some thought behind them. Now....I don't think you can run them with a stock airbox...but...that's the breaks I guess.... Ironic...if you look at the link for the heat wraps that I posted, they are actually shown on the RDZ/Shearer design...which, don't need the wraps since the go up and over the carbs and filters.... But, for display purposes and picture purposes...I undertand 100% why they took photos like that to show off their wraps... Quote Link to comment Share on other sites More sharing options...
99Banshee Posted August 15, 2006 Author Report Share Posted August 15, 2006 99shee...I'm not trying to sound like a jerk, but...I'd bet my money that long of an intake tract is hurting a little performance on that bike... I didnt buy them gay ass tubes... I used some old muffler pipe i had laying around and painted them black ( there half that size as shown now) I think the heat shields are a better choice... There is not enough space width wize.. Would filters that have an angled base make the filters fit ok. There is not enough space width wize.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.