CFM Posted August 14, 2006 Report Share Posted August 14, 2006 So now that I forgot to pull it before coating, how do I do it now??? Who has the special tool, or do I need to make one??? Already have the stem re-build kit in hand.. Thanks Quote Link to comment Share on other sites More sharing options...
DRI4life Posted August 14, 2006 Report Share Posted August 14, 2006 this is the biggest PITA in rebuilding a banshee.. one trick is to do it the redneck way with a good ol hammer and chisle and knock it loose.. whatch your fingers lol.... or you can find a square bar that fits into the nut and twist it out..i used a swaybar end link one time that randomly fit perfect... if your creative enough its not that hard.. iv never seen the tool for it if they do make one.. and your gonna want to clean the powdercoat off the threads.. Quote Link to comment Share on other sites More sharing options...
CFM Posted August 14, 2006 Author Report Share Posted August 14, 2006 I guess I'll do the upsidown bolt head with two welded nuts backyard mechanic special then... Damn I wish I remembered that beforehand.. Thanks Quote Link to comment Share on other sites More sharing options...
broke Posted August 14, 2006 Report Share Posted August 14, 2006 http://www.dunedevilinc.com/index.php?acti...epart&partid=29 Quote Link to comment Share on other sites More sharing options...
CFM Posted August 14, 2006 Author Report Share Posted August 14, 2006 Thanks guys, 30mm I can do... Off to Lowe's Quote Link to comment Share on other sites More sharing options...
CFM Posted August 17, 2006 Author Report Share Posted August 17, 2006 If anybody needs this tool, I made one that attaches to a 1/2 drive, works perfect... Now that I replaced the bearing, I have no use for it... Hopfully can save sombody some time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.