Bansheeman1121 Posted August 12, 2006 Report Share Posted August 12, 2006 K heres the deal bought 30mm carbs a while back and put like the smallest pilot i can ever find for em in and the thing just loads right up at idle i set the needle on the leanest clip, the mains run perfect good tan color and runs clear in 2nd through 6th gear with no bogging, the problem is it runs real choppy in 1st and at idle when you rev at idle its just choppy cant clear it out, the mods ive ran them with fmf fattys, v force 2s , noss coolhead 20cc domes, open airbox with noss proflow with k&n reed spacers , boost bottle and thats it i belive never ran em on my new port job, but im planning on putting all my stuff onto my 99 and it runs so crisp that i want the power from the 30s to take advantage of the port job but i dont want that loading up shit at idle any ideas? Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted August 12, 2006 Report Share Posted August 12, 2006 ok so what size pilots do u have in it? the smallest ones u can find doesnt help us to help you. we need to know pilot and main jet size before anyone can help you... Quote Link to comment Share on other sites More sharing options...
rocketboy Posted August 13, 2006 Report Share Posted August 13, 2006 i know yo u probably thin k your pilot is rich ....but just try this:150 mains and a set of 50 pilots with needle in middle clipsand i bet itll run really sweet . after its warmed and running good ....try pulling in choke half way at low speed(like half throttleish )if gets better... it wants fuel if it bogs ...it is being drowned with fuel off the pilots /needle clip position ,this is often called the "choke trick" Quote Link to comment Share on other sites More sharing options...
strokersquid Posted August 13, 2006 Report Share Posted August 13, 2006 on the other hand i have 30s with 250 mains 30 pilots and middle clip on mine but theyre round slide mikunis Quote Link to comment Share on other sites More sharing options...
Bansheeman1121 Posted August 13, 2006 Author Report Share Posted August 13, 2006 Stroker mine are round slides as well, what mods are you running and does yours rev clear at idle and everything? Quote Link to comment Share on other sites More sharing options...
bansheeseat$$ Posted August 13, 2006 Report Share Posted August 13, 2006 (edited) Another thing you might check is your float height.It may just be alittle to high causing it to load up at idle till it clears up in second.My .02 cents. Edited August 13, 2006 by bansheeseat$$ Quote Link to comment Share on other sites More sharing options...
Bansheeman1121 Posted August 14, 2006 Author Report Share Posted August 14, 2006 How do i check float height its probably the only thing i havnt done on em yet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.