jlace00 Posted August 9, 2006 Report Share Posted August 9, 2006 (edited) SO Here is the problem, Just got my top end rebuilt on my Shee, started to put it back in when a friend came over to help. He started to put the pipes on when i was doing the carbs and intake track..... He didn't know they (the Shop that rebuilt it) had stuffed paper towels in the exaust ports, I had pulled on out to see what it looked like....... so he installs the pipes we get it all back together. I go to start it and get it running and the right side exaust is not blowing anything and im like WTF, it took me a lil while to figure it out. HE left the paper towel in the exaust port which it the wedged itseld in the pipe and block the pipe..... took care of the problem ran it for a bit ran ok So the problem is now it seems to be smoking exsessively, and fouling plugs out. Are the cranks seals blown out of it ???? Oh ya the exaust seems to be putting out black oil like substance Edited August 9, 2006 by jlace00 Quote Link to comment Share on other sites More sharing options...
sredish Posted August 9, 2006 Report Share Posted August 9, 2006 SO Here is the problem, Just got my top end rebuilt on my Shee, started to put it back in when a friend came over to help. He started to put the pipes on when i was doing the carbs and intake track..... He didn't know they (the Shop that rebuilt it) had stuffed paper towels in the exaust ports, I had pulled on out to see what it looked like....... so he installs the pipes we get it all back together. I go to start it and get it running and the right side exaust is not blowing anything and im like WTF, it took me a lil while to figure it out. HE left the paper towel in the exaust port which it the wedged itseld in the pipe and block the pipe..... took care of the problem ran it for a bit ran ok So the problem is now it seems to be smoking exsessively, and fouling plugs out. Are the cranks seals blown out of it ???? Oh ya the exaust seems to be putting out black oil like substance 2 strokes will smoke. 2 strokes will put out a black oily substance, called oil. When your premixing, your putting the oil in with the gas, so naturally, it's burning the oil which produces this smoke and oily substance on the pipes. That is normal. What premix ratio do you run? Now, it can be on the excessive side if your running super rich, which you probably are if your fouling out. When are you fouling out, with it just idling or when your riding? If its when your idling, go down on the pilot some. If you DO NOT need the choke to COLD start the motor, then your too rich. Quote Link to comment Share on other sites More sharing options...
jlace00 Posted August 9, 2006 Author Report Share Posted August 9, 2006 (edited) is it possible to blow out the seals with that situation??? This is my 2nd banshee and I've never had it dripping out of pipe right before the silencers on T5s the like it is. I know the smoke and sometimes give off a lil extra oil but it was never this bad, there was two small puddles uunder each pipe Edited August 9, 2006 by jlace00 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.