trueraiderfan Posted July 31, 2006 Report Posted July 31, 2006 (edited) http://cgi.ebay.com/ebaymotors/ws/eBayISAP...mMakeTrack=true Hey guys I was woundering if these would work good with the setup that I have. I mean will they make a big deffrence over my stck carbs? Also wanted to know if they are a good carbuerator (sp?) Also would they work well down the line if i decided to go with something more radical like a cub, or well anything. I just dont want to buy them and do a few more mods and have to get diffrent one's again. Also what would be a good price to pay for them? Edited July 31, 2006 by trueraiderfan Quote
blueshee03 Posted August 1, 2006 Report Posted August 1, 2006 http://cgi.ebay.com/ebaymotors/ws/eBayISAP...mMakeTrack=true Hey guys I was woundering if these would work good with the setup that I have. I mean will they make a big deffrence over my stck carbs? Also wanted to know if they are a good carbuerator (sp?) Also would they work well down the line if i decided to go with something more radical like a cub, or well anything. I just dont want to buy them and do a few more mods and have to get diffrent one's again. Also what would be a good price to pay for them? 34pj's are an excellent carb for stock cylinder drag bikes in my oppinion i ran a set for a couple years.however if your thinking of cubs later on i'd go with 35pwk's.in addition to the carbs you'll need bigger intakes for them.get rid of the boost bottle its just extra weight and serves no real purpose. a question for you though: why t6's on a drag ported motor?get some grr's ,shearers ,t5's or cpi's.as for price you know what you can afford. Quote
jbooker82 Posted August 1, 2006 Report Posted August 1, 2006 I got them on my banshee. It is bored .040 over with mx port job. With all the mods in my sig. They run great. Do your self a favor though. Dont get the UPP carb boots for 34mm carbs. I got a boss racing intake. It is a solid billit intake that bolts to both cylinders. It has a crossover tube machined in so there is no way sand can work its way in. I got mine on ebay. I just did a seach for banshee intake. passion racing also sells them. I got mine from this guy. He only has one listed for 28mm carbs right now. He had the best price. 110 plus 12 bucks shipping. I am sure he would hook you up if you emailed him. in2glamis's Ebay Store LINK Quote
trueraiderfan Posted August 1, 2006 Author Report Posted August 1, 2006 sweet guys thanks for the input Quote
Animalman294 Posted August 2, 2006 Report Posted August 2, 2006 An internal crossover, thats a cool idea................ :beer: Quote
Polish Posted August 3, 2006 Report Posted August 3, 2006 I had 34 PJ's.........and they sucked a$$ IMO...........35 PWK's Quote
jbooker82 Posted August 3, 2006 Report Posted August 3, 2006 I had 34 PJ's.........and they sucked a$$ IMO...........35 PWK's Why did they suck. Mine do great. These carbs have been around for a while. I are you sure it was the carbs and not the tuner. :yelrotflmao: Quote
r/atvshee Posted August 3, 2006 Report Posted August 3, 2006 Why did they suck. Mine do great. These carbs have been around for a while. I are you sure it was the carbs and not the tuner. :yelrotflmao: mine are great too, they would probably be better if i went to down a main size but it runs like SOB Quote
Polish Posted August 3, 2006 Report Posted August 3, 2006 Why did they suck. Mine do great. These carbs have been around for a while. I are you sure it was the carbs and not the tuner. :yelrotflmao: Did I give a reason why they sucked a$$?......no.........they suck cause its old technology.....I said nothing about tuning...Right?.........you will get more out of your built motor with 35PWK's...........I had PJ's on an old 87 trx250............freggn 19 years ago.............. And if you read closly it says ....(IMO) :baseball_shocked: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.