Jump to content

Help jetting New motor with T5s


Recommended Posts

This is what I have Coolhead 22cc domes AV gas Open foam filters T5s 4+ timing .40 over pistons with stock carbs with Rad reeds and I'm at 250 above sea level with temp between 75 to 100 (TEXAS) what should I be jetting this thing at thanks for the help

Edited by Ting Ting
Link to comment
Share on other sites

340 mains to start (may need leaner)

Needle in middle clip.

stock or 27.5 pilots, 1.0 to 2.0 turns out.

 

To be honest, with +4 timing and 22cc domes, you're wasting your money on AV gas.

Unless you can get AV gas cheaper than premium pump gas...then I'd see buying it.

 

You don't have enough compression or timing to warrant anything higher than 92 octane...

 

T5's and no airbox are very, very common mods. I'd bet you could've done a search on here and found your answer in 5 minutes or less...:)

 

Good luck.

Link to comment
Share on other sites

I get AV really cheap at the airport by my house but I'm about to change the domes to 19 in a week or so I had my out stock head shaved .30 an ran AV ran perfect but switched to the coolhead and didn't get the right domes the first time and couldn't wait for the 19 to come in so I but the 22 in

Edited by Ting Ting
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...