joshv5.0 Posted July 24, 2006 Report Share Posted July 24, 2006 where are all the grounds at on a banshee i want to check them all to see if i am missing on or if i just have a bad connection any help appreciated Quote Link to comment Share on other sites More sharing options...
BenBB Posted July 24, 2006 Report Share Posted July 24, 2006 1. Stator (black wire to stator itself or timing plate, don't remember exactly but you'll see it) 2. Voltage Regulator (or at least near it, stock there's an eyelet terminal from the harness that grounds to the frame at one of the volt reg mounting bolts) 3. Coil (the coil itself grounds to the frame at one of the mounting bolts; not a wire, well there is a ground wire going to it also but it fits on the spade terminal, then the coil itself grounds to the frame at the mounting bolt) Quote Link to comment Share on other sites More sharing options...
joshv5.0 Posted July 24, 2006 Author Report Share Posted July 24, 2006 1. Stator (black wire to stator itself or timing plate, don't remember exactly but you'll see it) 2. Voltage Regulator (or at least near it, stock there's an eyelet terminal from the harness that grounds to the frame at one of the volt reg mounting bolts) 3. Coil (the coil itself grounds to the frame at one of the mounting bolts; not a wire, well there is a ground wire going to it also but it fits on the spade terminal, then the coil itself grounds to the frame at the mounting bolt) well seems like all my grounds are good i've checked them all i've got continueity to the frame and motor on every ground guess it will be a cdi that fixes this one. since i have already changed the stator,and coil. and checked all the key switches and run switch btw the stator puts out about 10.v a/c with on solid kick to the cdi wiring, does that sound about right Quote Link to comment Share on other sites More sharing options...
BenBB Posted July 24, 2006 Report Share Posted July 24, 2006 I'm not sure, where are you reading that, on the orange wire where it connects to the coil? I can test my son's Banshee tonight and see what it reads (mine's down right now waiting on an RZ stator...from Electrex in UK)... Quote Link to comment Share on other sites More sharing options...
joshv5.0 Posted July 24, 2006 Author Report Share Posted July 24, 2006 I'm not sure, where are you reading that, on the orange wire where it connects to the coil? I can test my son's Banshee tonight and see what it reads (mine's down right now waiting on an RZ stator...from Electrex in UK)... i got that from the red and green wires that go from the stator to the cdi box btw thanks for the help so far Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.