bansheefire Posted July 19, 2006 Report Share Posted July 19, 2006 am in miami so am at sea level,but the bike was brought down from nj so my plugs look like the bike is running very rich. these are my mods foam filter stupid boost bottle trail ported toomey t5's time advance +4 bored .020 over weiscos milled head.030 30mm carbs-brand dont say on them but they were bought from vito running 93 octane :baseball_bat: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted July 19, 2006 Report Share Posted July 19, 2006 Sorry...I"m going to be a total smart ass for just a minute. Try calling an auto parts store, asking for a price on brake pads, and when they ask what kind of vehicle...just tell them... "I don't know...I just bought it from Ford"... Ok, end of rant. Seriously. There's some numbers on the carb somewhere. Vitos normally deals with PJ and PWK series Keihin carbs...but that's normally stamped right on the side of it. Try taking and posting a picture, or numbers, or something. Even if you take a picture of the jets...someone could probably help by looking at them. But, we're flying 100% bind as of right now.... You do know that pilots only effect the idle to 1/8 throttle...the majority of your riding is probably more throttle than that, which is your needle and main jet, not pilots. Also, with a milled head, check your compression. You may or may not need race gas/pump gas mix. You said sea level...so that's about as high of compression as you'd see. Quote Link to comment Share on other sites More sharing options...
bansheefire Posted July 19, 2006 Author Report Share Posted July 19, 2006 thnx the guy at vitos told be how to do it sence i got the adjustable power jet on the carbs Quote Link to comment Share on other sites More sharing options...
dajogejr Posted July 19, 2006 Report Share Posted July 19, 2006 Glad to hear... In the process of getting my carbs powerjetted as well...simply too easy not to do... Quote Link to comment Share on other sites More sharing options...
i12gofast Posted July 20, 2006 Report Share Posted July 20, 2006 Glad to hear... In the process of getting my carbs powerjetted as well...simply too easy not to do... Hey, where can i get more info on thsi power jetting?? :baseball_bat: Quote Link to comment Share on other sites More sharing options...
dajogejr Posted July 20, 2006 Report Share Posted July 20, 2006 Do a search on "dial a jet" Vito's carries them, and Dave Moore racing has some real good ones.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.