AustinONeal Posted July 19, 2006 Report Share Posted July 19, 2006 Been looking in the market to get some cheetah 68mm cubs but i want them ported by someone who sells them so i can just get them ported THEN have them shipped to me, whos got the best portjob and price Quote Link to comment Share on other sites More sharing options...
KEVSWS6 Posted July 19, 2006 Report Share Posted July 19, 2006 Stock through 7MM Drag ported & Plated $1075.00 with the sponsor RDZ. Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted July 19, 2006 Report Share Posted July 19, 2006 thats preety good price ..... with pistons ??? i seen cyls alone on ebay for 800 no pistons + whoever does ure porting ( new ) ... really all in the same price range Quote Link to comment Share on other sites More sharing options...
AustinONeal Posted July 19, 2006 Author Report Share Posted July 19, 2006 (edited) i wanna stock stroke 68mm i think thats a big bore + yea does it come with pistons?? 68mm cub Pistons gasket plated grag ported -------------- HOW MUCH?! Anyone Got MSN messenger? austinoneal@hotmail.com Edited July 19, 2006 by AustinONeal Quote Link to comment Share on other sites More sharing options...
KEVSWS6 Posted July 19, 2006 Report Share Posted July 19, 2006 No pistons with that setup but full drag port. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted July 19, 2006 Report Share Posted July 19, 2006 Call K&T Fastest bikes on the mountain are from K&T. Quote Link to comment Share on other sites More sharing options...
banshee332 Posted July 19, 2006 Report Share Posted July 19, 2006 Jim from passion racing does a very good job with the cubs. His price's are very good to Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted July 19, 2006 Report Share Posted July 19, 2006 jeff from FAST has everything you need and he does some kick ass porting. pm FASTOYS on here or hit me up and I will give ya his phone number. Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted July 19, 2006 Report Share Posted July 19, 2006 jeff from FAST has everything you need and he does some kick ass porting. pm FASTOYS on here or hit me up and I will give ya his phone number. Jeff, you going to have anything at sandmountain next year for the king of the mountain competitions? Quote Link to comment Share on other sites More sharing options...
AustinONeal Posted July 19, 2006 Author Report Share Posted July 19, 2006 alot of my craycraft buddys have a lot of good things to say about Jeff at fast. DollarBill told me if u wanted a fast banshee send it there, they are the best he claims. but do they have them i wanna call and say hey i want a drag set of 68 cheetah cubs and they will have them? ready to ship? Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted July 19, 2006 Report Share Posted July 19, 2006 Sand mountain next year, is that sand mountain Nevada..................? Quote Link to comment Share on other sites More sharing options...
gipperz Posted July 19, 2006 Report Share Posted July 19, 2006 jeff from FAST has everything you need and he does some kick ass porting. pm FASTOYS on here. He did my porting and complete motor, It really hauls a$$, never stops pulling. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted July 19, 2006 Report Share Posted July 19, 2006 jeff from FAST has everything you need and he does some kick ass porting. pm FASTOYS on here or hit me up and I will give ya his phone number. Not to knock Jim or K&T...they're both very reputable...and I've PM'd Jim a few times on other stuff. Very nice guy, very knowledgable. But... I priced out my complete setup from Jeff. Instead of just sending me parts and having me on my way, we went over EVERYTHING...and I mean all of it. From spark plug to drain plug, clutch to flywheel. It was litterally an hour long phone call (Jeff does like to jabber a bit, which...is fine with me.. ) He made sure I had the "cub kit" which is a base gasket and stud extenders, which you'll need. Bought my crank which he recommended a heavier duty bearing for...as well as him re-welding it for me. (Anyone on here will tell you the factory welds from Wiseco are junk...including you, right JT? ) I know he's out on a riding trip this week and out of the shop, though. Call 'em all. Jeff, Jim @ Passion, K&T, redline, A&S, Grand River Racing....they're all reputable builders and good for the sport. Go with who you feel gives you the best customer service and pricing. Jeff is always my first call...period. Quote Link to comment Share on other sites More sharing options...
2bzy2p Posted July 19, 2006 Report Share Posted July 19, 2006 K&T all the way,, kim is one hell of a guy help you out all the way, sell you only what u need and want and very very oh ya one of the top builders in the sport!! Quote Link to comment Share on other sites More sharing options...
Animalman294 Posted July 19, 2006 Report Share Posted July 19, 2006 I trust Jeff 150%, not only by our conversations, but also by reputation on this site as well as recomendations from people on here I trust. This is by far the best site on the net................ :beer: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.