MinEsFasteR79 Posted July 9, 2006 Report Share Posted July 9, 2006 I've never polished anything before and I wanted to start on something small. Is it possible to polish the stock kick starter?sorry if this is a repost of this question. Thanks for the replies. Quote Link to comment Share on other sites More sharing options...
liquedfire Posted July 9, 2006 Report Share Posted July 9, 2006 (edited) sure it is take a very very fine sand paper and snad the kick start down then take some poshing compound ( i relly like Mothers) and rub away until u like the shink then make sure theres no oil on the kick starter and then clear coat it 2 keep it from rusting hope this helps p.s how do u get your phot from bike pics to show up where your signature would go??? Edited July 9, 2006 by liquedfire Quote Link to comment Share on other sites More sharing options...
MinEsFasteR79 Posted July 9, 2006 Author Report Share Posted July 9, 2006 what I did is..I uploaded onto bikepics (obviously) and than I clicked to view the fullsize of the picture you want. than right click hit properties and look for the address or URL and it should be a long website name. I copied that. and than went into my control panel and went to edit sig and hit the image button and than just pasted the site URL into the input box that pops up when you hit the image button. if that doesn't work. I can try and help you out sometime. just PM me Quote Link to comment Share on other sites More sharing options...
liquedfire Posted July 10, 2006 Report Share Posted July 10, 2006 thanks dude got it 2 work hope your kicker turns our good post some pics when your done :beer: Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted July 10, 2006 Report Share Posted July 10, 2006 what I did is..I uploaded onto bikepics (obviously) and than I clicked to view the fullsize of the picture you want. than right click hit properties and look for the address or URL and it should be a long website name. I copied that. and than went into my control panel and went to edit sig and hit the image button and than just pasted the site URL into the input box that pops up when you hit the image button. if that doesn't work. I can try and help you out sometime. just PM me thanks :baseball_bat: MinEsFasteR79 i've been trying to do that & nobody would reply it worked thanks again :thumb: you might want to make yours smaller I've seen complaints B-4 Quote Link to comment Share on other sites More sharing options...
liquedfire Posted July 10, 2006 Report Share Posted July 10, 2006 lol i know i was thinking the same thing but i dono how?????? if u could help plz do lol Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted July 10, 2006 Report Share Posted July 10, 2006 (edited) go to your picture go to view,text,Ipicked smallest I think? just what I tried when I saw your pix were so big? to late I see you figured it out Edited July 10, 2006 by 275hp banshee's Quote Link to comment Share on other sites More sharing options...
liquedfire Posted July 10, 2006 Report Share Posted July 10, 2006 lol i know thanks anyway Quote Link to comment Share on other sites More sharing options...
MinEsFasteR79 Posted July 10, 2006 Author Report Share Posted July 10, 2006 Anytime. and you've seen complaints about mine?? I'll make it smaller just because it looks kind of blurry anyway. I'm glad I could help! and about the air compressor. I have a 155 psi I forget how many gallons..but its pretty big. and I'm going to get a die grinder, hopefully soon. Thanks for the help guys! Quote Link to comment Share on other sites More sharing options...
MinEsFasteR79 Posted July 10, 2006 Author Report Share Posted July 10, 2006 its got a reg. on it. it came with one on it. its a pretty sweet set up. (my dads) lol. Thanks dude. Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted July 10, 2006 Report Share Posted July 10, 2006 Anytime. and you've seen complaints about mine?? I'll make it smaller just because it looks kind of blurry anyway. I'm glad I could help! and about the air compressor. I have a 155 psi I forget how many gallons..but its pretty big. and I'm going to get a die grinder, hopefully soon. Thanks for the help guys! no, not yours ,thanks again Quote Link to comment Share on other sites More sharing options...
MinEsFasteR79 Posted July 11, 2006 Author Report Share Posted July 11, 2006 No problem man. and I kind of wanted to make it smaller anyway. but bikepics has been stupid to me lately and I couldn't upload a different size pic. Its probably just my internet. stuck on dial up out here. no other option except 90 dollar a month satellite internet and my dad isn't going to pay for that (im only 16 thats why I still live at home). lol. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.