LeadBoots Posted June 25, 2006 Report Share Posted June 25, 2006 does the parking brake make a difference if it is not on? Quote Link to comment Share on other sites More sharing options...
caleb_yfz350 Posted June 25, 2006 Report Share Posted June 25, 2006 does the parking brake make a difference if it is not on? i took mine off and now my bike runs like crap. they say the circuit isn't closed. i didn't know there was anything electrical involved with the p- brake. but since i removed it my bike won't run Quote Link to comment Share on other sites More sharing options...
pipebomb Posted June 25, 2006 Report Share Posted June 25, 2006 does the parking brake make a difference if it is not on? can you be a bit more specific?? How do you mean " if it is not on"? do you mean Removed? Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted June 25, 2006 Report Share Posted June 25, 2006 i belive if you have it disconected you have to have the sensor unplugged . I unplug all the saftey sensors 1 : stock carb tors ( remove the two connectors ) 2: Unplug tors box next to spark plug coil 3: unplug the saftey sensor wire that comes out of the throttle housing 4: Unplug the parking break sensor on the clutch lever ? if it has one ? Cant clearly remember how because i never ran stock. If the parking break sensor is on and u start the bike it should die as soon as u rev it, thats how my old warrior was , and my banshee when i first got it started. Hope i cleared any information up for you , if you have any questions shoot me a pm and i'll do my best into helping you. Quote Link to comment Share on other sites More sharing options...
375hp banshees Posted June 25, 2006 Report Share Posted June 25, 2006 does the parking brake make a difference if it is not on? verry low rpm rev limmiter takes over so you dont ride w/ P- brake on. if you disconnect it: there is a sensor on the lever that the two wires have to be connected together, or if you left linkage on & just removed the cable you can wire up the lever so that it pushes the senser in. It will start & idol but wont rev. above an idol (verry low rpm rev limmiter takes over so you dont ride w/ P- brake on) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.