fast@$$rider Posted June 16, 2006 Report Share Posted June 16, 2006 (edited) i need to know what pipes would work best for a stock 2006 banshee i was thinking toomey t6s looking for good midranger and powerful topend Edited June 16, 2006 by fast@$$rider Quote Link to comment Share on other sites More sharing options...
bkabina Posted June 16, 2006 Report Share Posted June 16, 2006 Shearer. Quote Link to comment Share on other sites More sharing options...
Hilarious Posted June 16, 2006 Report Share Posted June 16, 2006 Shearer. Or CPIs, whichever you can find cheapest is what I'd get. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted June 16, 2006 Report Share Posted June 16, 2006 Do a search....pipes are covered here about 1 million times... Personally, on a stock shee I'd go with T6. However...the real question is...how long do you plan on keeping in stock? A ported motor with an opened up airbox will really take more advantage of the Shearer or CPIs... Those suckers like to BREATHE!!! If you plan on keeping it stock motor and just want more around...usable power, I'd say Toomeys. Quote Link to comment Share on other sites More sharing options...
RILS Posted June 17, 2006 Report Share Posted June 17, 2006 Do a search....pipes are covered here about 1 million times... Personally, on a stock shee I'd go with T6. However...the real question is...how long do you plan on keeping in stock? A ported motor with an opened up airbox will really take more advantage of the Shearer or CPIs... Those suckers like to BREATHE!!! If you plan on keeping it stock motor and just want more around...usable power, I'd say Toomeys. I like my trinitys.You can get them at motoxoutlet for about the same price as the toomeys and the trinitys are stainless.Ive never run toomeys but the trinitys are badass in my opinion. Quote Link to comment Share on other sites More sharing options...
watkins Posted June 17, 2006 Report Share Posted June 17, 2006 I had FMF SST's and they worked awesome for a non-ported motor... but that was my mistake.. I should have gone with Fatty's to begin with. My 12-port project is going to be running shearers.... If I were you I would go with Toomey T5's... seems to be the one I see most out there... but if you never plan on porting your motor the FMF SST's perform very good, just fit kinda shitty. Quote Link to comment Share on other sites More sharing options...
2bzy2p Posted June 17, 2006 Report Share Posted June 17, 2006 ive heard on a unported motor the T6s do real good,, id go with a pair of unstamped cpis!!!! be a good pipe for ya :biggrin: let me know i got a set for sell Quote Link to comment Share on other sites More sharing options...
bombedbanshee06 Posted June 17, 2006 Report Share Posted June 17, 2006 hI I VE GOT TOOMEY TR6 AND I REALLY HAPPY WITH THEM THEY PERFORM GREAT I JUST ADD A BOOST BOTTLE AND SOME BOYSEN POWER REEDS ASWELL BUT EVERY THIN ELSE IS STOCK. GOOD LUCK HOPE YOU FIND WHAT YOU WANT Quote Link to comment Share on other sites More sharing options...
DIRTMAN350 Posted June 17, 2006 Report Share Posted June 17, 2006 I have FMF Fatty's on mine and they do really well. I do have a stock bottom end. pull good from mid to top. Quote Link to comment Share on other sites More sharing options...
rocketboy Posted June 18, 2006 Report Share Posted June 18, 2006 ya' cant go wrong wit h a set or T5 pipes when the mods satrt getting up there on her switch over to shearers for some major power Quote Link to comment Share on other sites More sharing options...
fast@$$rider Posted June 22, 2006 Author Report Share Posted June 22, 2006 the banshee has a port/polish job no airbox k&n filters and paul turner pipes hat these pipes looking for good inframe pipes so what do you reccomend shoot me a link to the pipes Quote Link to comment Share on other sites More sharing options...
kb7kuh Posted June 22, 2006 Report Share Posted June 22, 2006 if it's ported....CPI in frames!!!! Quote Link to comment Share on other sites More sharing options...
bkabina Posted June 22, 2006 Report Share Posted June 22, 2006 the banshee has a port/polish job no airbox k&n filters and paul turner pipes hat these pipes looking for good inframe pipes so what do you reccomend shoot me a link to the pipes Heres a link.http://passionracingengines.com/Products.html Quote Link to comment Share on other sites More sharing options...
fast@$$rider Posted June 23, 2006 Author Report Share Posted June 23, 2006 does anyone have pictures of the cpis mounted performance is important but they have to look cool to Quote Link to comment Share on other sites More sharing options...
Hilarious Posted June 24, 2006 Report Share Posted June 24, 2006 does anyone have pictures of the cpis mounted performance is important but they have to look cool to Here you go. :thumb: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.