batoutofshell Posted June 12, 2006 Report Share Posted June 12, 2006 96 Banshee DG Pipes,290 mains,Air screws 1.5 out,Open box K&N and outerwears, Stock Carbs with tors,New 180 watt stator,Adjustable timing plate set at stock for breakin period,New Crank with seals,New top end Wiesco 64 mm setup, stock head 120 compression,Boysen reeds. Will fire ittermitently on the choke side spitting fuel at idle.Weaker on the choke side even when riding wot. tors plugged in or unplugged doesn't change.Cleaned carbs several times, choke tube in place, no airleaks(checked with carb cleaner)Swapped plug wires no help,Plug on choke side wet while the other dry. same color choc brown. This is a friends shee and its just fucking confusing the fuck out of us. We both have plenty of 2 stroke experience but this ones got us pissed.I am sure its a carb issue because we switched the plug wires and no help. but what the Fuck everything has been done to these carbs that should be.I am posting to what see what some of the other experienced guys here think????????? Quote Link to comment Share on other sites More sharing options...
bansheeseat$$ Posted June 12, 2006 Report Share Posted June 12, 2006 Check the gap on the pickup at the flywheel. Quote Link to comment Share on other sites More sharing options...
batoutofshell Posted June 12, 2006 Author Report Share Posted June 12, 2006 would that cause 1 side to be weak? without effecting the other. its strong. What should the gap be if you know? Quote Link to comment Share on other sites More sharing options...
KlotzBanshee Posted June 12, 2006 Report Share Posted June 12, 2006 Floats maybe? did you check the height when you had the carbs apart last? IDK :shrug: Quote Link to comment Share on other sites More sharing options...
bansheeseat$$ Posted June 12, 2006 Report Share Posted June 12, 2006 20 thousands air gap at the raised trigger.You might want to check the gap at both raised triggers to see if there is a discrepancy. Quote Link to comment Share on other sites More sharing options...
WinNuke2003 Posted June 12, 2006 Report Share Posted June 12, 2006 I set mine at 22 thousandths. Should be 20 but its magnetic so a really tight 22 works. Also make sure you didnt swap the bowls on the carbs and your parking break is off. Good luck. Quote Link to comment Share on other sites More sharing options...
batoutofshell Posted June 12, 2006 Author Report Share Posted June 12, 2006 I just thought about it and we swapped the plug wires and it didn't help so I would say the flywheel is out the question thats why I thought some type of carb issue. Floats maybe? did you check the height when you had the carbs apart last? IDK :shrug: didn't check the floats but never messed with them and no fuel coming out of the overflows Quote Link to comment Share on other sites More sharing options...
bansheeseat$$ Posted June 12, 2006 Report Share Posted June 12, 2006 One other suggwstion is make sure you don't have the slides in the wrong carbs. Quote Link to comment Share on other sites More sharing options...
batoutofshell Posted June 12, 2006 Author Report Share Posted June 12, 2006 slides are good right side runs to a t the left is fucked. I am going to check the float tommorow but not leaking out the overflows???? Quote Link to comment Share on other sites More sharing options...
Handyman Posted June 12, 2006 Report Share Posted June 12, 2006 This may ouns weird. but swap the needles to see if that effects anything. I had the same problem with mine and supposedly it was the needle causing the problems. Quote Link to comment Share on other sites More sharing options...
ellison445 Posted June 12, 2006 Report Share Posted June 12, 2006 I was just about to say the same thing :beer: This may ouns weird. but swap the needles to see if that effects anything. I had the same problem with mine and supposedly it was the needle causing the problems. Quote Link to comment Share on other sites More sharing options...
yyz Posted June 12, 2006 Report Share Posted June 12, 2006 96 Banshee DG Pipes,290 mains,Air screws 1.5 out,Open box K&N and outerwears, Stock Carbs with tors,New 180 watt stator,Adjustable timing plate set at stock for breakin period,New Crank with seals,New top end Wiesco 64 mm setup, stock head 120 compression,Boysen reeds. Will fire ittermitently on the choke side spitting fuel at idle.Weaker on the choke side even when riding wot. tors plugged in or unplugged doesn't change.Cleaned carbs several times, choke tube in place, no airleaks(checked with carb cleaner)Swapped plug wires no help,Plug on choke side wet while the other dry. same color choc brown. This is a friends shee and its just fucking confusing the fuck out of us. We both have plenty of 2 stroke experience but this ones got us pissed.I am sure its a carb issue because we switched the plug wires and no help. but what the Fuck everything has been done to these carbs that should be.I am posting to what see what some of the other experienced guys here think????????? assuming these are stock carbs... make sure the bowls are not flipped left to right... left side has a choke circuit, right side does not yyz Quote Link to comment Share on other sites More sharing options...
bigboybanshee Posted June 12, 2006 Report Share Posted June 12, 2006 How clean is your air filter? I had an intermittent problem similar to this and my outerwear was clogged and didn't let enough air through for the bike to run properly. Just a thought :shrug: Quote Link to comment Share on other sites More sharing options...
98bonerSTOCKshee Posted June 12, 2006 Report Share Posted June 12, 2006 got another set of carbs you can try? Quote Link to comment Share on other sites More sharing options...
batoutofshell Posted June 12, 2006 Author Report Share Posted June 12, 2006 Carb bowls are not swapped and it would not matter when its warm, Air filter clean.Took off outerwears no change and its clean also. as far as needles don't think that would effect it at idle.But you never know with these Shee's!!!! :: got another set of carbs you can try? I would swap him mine to check but hes got the fucking tors on there still, Hopefully we can get another friends with tors to check it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.