SHEEBANSAVAGE Posted June 7, 2006 Report Share Posted June 7, 2006 Hey guys, I am in the process of installing the UPP cahin slider kit on my shee and I have a quick question. Which roller goes on the top and which one goes on the bottom? Thats all for now Quote Link to comment Share on other sites More sharing options...
pipebomb Posted June 7, 2006 Report Share Posted June 7, 2006 the smaller one goes on the top(should be 34mm) and the larger one on the bottom( either 39 or 42mm depending on which they include in the kit) Quote Link to comment Share on other sites More sharing options...
dajogejr Posted June 7, 2006 Report Share Posted June 7, 2006 I gotta be honest, I got the UPP chain slider kit from Magic. Comes with both rollers, swingarm slider, front and rear. I don't remember either of the chain rollers being bigger than the other....and I do remember checking... This is interesting.... Quote Link to comment Share on other sites More sharing options...
WALLACE84 Posted June 7, 2006 Report Share Posted June 7, 2006 (edited) Ive been looking for a complete kit like this and havent found one with everything in it. You say magic racing has one? guess I didnt look to hard thanks Edited June 7, 2006 by WALLACE84 Quote Link to comment Share on other sites More sharing options...
pipebomb Posted June 7, 2006 Report Share Posted June 7, 2006 get it from Magic or right from UPP themselves. http://www.uppracing.com/ Quote Link to comment Share on other sites More sharing options...
odaen Posted June 7, 2006 Report Share Posted June 7, 2006 modquad sells them too the upp kit has the same size rollers if I remember right. the slider that goves over the pivot tube in my upp kit was defective. the nut spun inside the plastic, so i bought the modquad kit and eventually pulled my swingarm off and put it on. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted June 7, 2006 Report Share Posted June 7, 2006 Actually...now that I think of it. I won from HQ a mod quad roller bearing and water pump cover... I used one of those, and one from the UPP. I did my cub and swingarm at the same time, so I just bolted the swingarm sliders onto my swinger before it ever was mounted up to the bike.... Quote Link to comment Share on other sites More sharing options...
SHEEBANSAVAGE Posted June 10, 2006 Author Report Share Posted June 10, 2006 Thanks for the replys!!! Later Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.