IamKazam Posted May 29, 2006 Report Share Posted May 29, 2006 Choice A:Shearers Choice B: GRR inframes Choice C:Rockets Choice D:LRD Choice E:Trinitys What pipe will give me the most high mid-top end power w/o totally sacrificing the bottem end and what will the power delivery be like on these pipes (smooth, on-off)? Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted May 30, 2006 Report Share Posted May 30, 2006 shearers have an awesome top end with a hard hit but not much on botton. cpi should have more on the bottom and not so hard of a hit but will lose just a bit on top compared to shearers. rockets have a pretty strong bottom end not so hard of a hit and a top end that i feel is better than the cpi. (on a 4mm motor i had) grr inframes, who knows cuz i dont know anyone who has them but i bet theyll be pretty awesome. lrd and trinity are not really drag pipes so i wouldnt even worry about them. if you wanna go with a non-drag orientated pipe id go with t5s. Quote Link to comment Share on other sites More sharing options...
chase@miamiatv.com Posted May 30, 2006 Report Share Posted May 30, 2006 grand river dude..... Quote Link to comment Share on other sites More sharing options...
RILS Posted May 30, 2006 Report Share Posted May 30, 2006 I dont know about the others most of them are serious drag pipes from what i hear except mabe the lrd some like em some dont.I just put a set of trinity stage lvs on my bike and they made good power thourgh out. I went up 1 size on the front[15] and still have good bottom great mid to high.They are kinda high but the stainless steel is very nice.I feel they are not a full drag more of a allaround mid to top pipe.The others you mentioned from what i hear are more full top end pipes not to say they are not great pipes just depends more on what you plan on doing with them.The trinitys are really smooth and do pretty good anywhere. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted May 31, 2006 Report Share Posted May 31, 2006 It should be added that unless you get your bike ported, you won't take full advantage of drag pipes. Should you go that route, ask your builder what pipe they prefer. Chances are a reputable builder will have their own opinion, and what works best with their setup. I don't think you're going to get a smooth on/off delivery with any of the drag pipes. Sure...some will "lessen" that a bit more than others...but, it's gonna hit...be a narrow powerband, and make a lot of power in that short spread. Unless you're committed to duning and drag racing...a drag pipe might not suit your needs.... Quote Link to comment Share on other sites More sharing options...
IamKazam Posted May 31, 2006 Author Report Share Posted May 31, 2006 Would you guys recommend trinitys as a mid-top end pipe? I notice they're made out of stainless which is nice. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted May 31, 2006 Report Share Posted May 31, 2006 Trinity has a mostly bad name here on the HQ.... I would venture to say more for their service than their products.... However, I've never used, installed or tuned anything Trinity...so, sorry, I wish I could comment first hand. Quote Link to comment Share on other sites More sharing options...
KlotzBanshee Posted May 31, 2006 Report Share Posted May 31, 2006 (edited) I've got some Trinity stuff. : Stage IV pipes, clutch kit, other misc. parts. The quality and craftsmanship of the products are second to none. The customer service is...OK, I hear it's alot better than it used to be. They've got some new guys over there resently...so far so good. I don't have anything BAD to say about my experiences with them. Although expensive, I love my pipes. Stainless Steel is the shit. They are comparable to T5's and make more top end power and sound better IMO. I wouldn't consider them to be drag pipes, more like all around with strong mid-top. They do make DRAG pipes though too. Edited May 31, 2006 by AssWhore Quote Link to comment Share on other sites More sharing options...
Toomey Banshee Posted June 1, 2006 Report Share Posted June 1, 2006 Get some CPI's and be done with it. Quote Link to comment Share on other sites More sharing options...
2bzy2p Posted June 1, 2006 Report Share Posted June 1, 2006 shearer shearer shearer!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.