Rebel3190 Posted May 24, 2006 Report Share Posted May 24, 2006 I was going to get dirt diggers from barnett ive got the top end bored with wiesco pistons and speed tech porting,k&n,jetted,the bore is in my siggy. Quote Link to comment Share on other sites More sharing options...
cdwood37 Posted May 24, 2006 Report Share Posted May 24, 2006 Thats exactly the clutch i have with my new 421 cub and no slipping so far, use all 6 hd springs. Quote Link to comment Share on other sites More sharing options...
EastCoast Banshee Posted May 24, 2006 Report Share Posted May 24, 2006 After all the good things i hear about tusk clutches i dont think i would drop the extra 60$ for a barnett clucth. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted May 24, 2006 Report Share Posted May 24, 2006 i wouldnt bother with ebc, barnett or any of them other junk ass fuckin clutches. just buy the best and dont worry about it anymore. you need a FAST clutch setup. sure its more expensive, but i guarantee you itll out last those others. do a search for FAST clutch and see what u come up with... Quote Link to comment Share on other sites More sharing options...
blueshee03 Posted May 24, 2006 Report Share Posted May 24, 2006 not to start any sh..,but ebc uses the same fibers as was used in the fj 600 street bike fibers and the fzr fibers.they are probally the toughest and best lasting fibers out there.unless you are pushing upwards of 80 hp and drag racing ,the tusk and barnett clutches work just fine providing you also use the correct oil in your tranny and the pressure plate ,clutch boss and other parts are in good shape.most guys change they're clutch fibers and steels but don't even give any thought to how much the other parts are worn.i my self installed new fibers and steels only and had the clutch slip after i got it together only to find out it was a worn pressure plate causing the trouble all along. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted May 24, 2006 Report Share Posted May 24, 2006 Actually....the FAST clutch is only a few bucks more than an EBC or Barnett you could buy online... With all 6HD springs in mine, and after a year of beating on it...it didn't slip at all on the DYNO with 85 RWHP...so, that's good enough for me in my book... Before I built my cub, I used 3 HD and 3 stock springs, and it held up just fine... Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted May 25, 2006 Report Share Posted May 25, 2006 not to start any sh..,but ebc uses the same fibers as was used in the fj 600 street bike fibers and the fzr fibers.they are probally the toughest and best lasting fibers out there.unless you are pushing upwards of 80 hp and drag racing ,the tusk and barnett clutches work just fine providing you also use the correct oil in your tranny and the pressure plate ,clutch boss and other parts are in good shape.most guys change they're clutch fibers and steels but don't even give any thought to how much the other parts are worn.i my self installed new fibers and steels only and had the clutch slip after i got it together only to find out it was a worn pressure plate causing the trouble all along. 520368[/snapback] i def agree that people overlook their clutch parts..thats usually the first thing i tell ppl especially when they have a 98 motor... Quote Link to comment Share on other sites More sharing options...
dajogejr Posted May 25, 2006 Report Share Posted May 25, 2006 Word... Instead of playing guessing games, when I ordered my cub from Jeff, I got a new basket, Inner and Outer hub too... Why waste time putting all that money into the motor when it can't get to the ground? Quote Link to comment Share on other sites More sharing options...
jankab Posted May 25, 2006 Report Share Posted May 25, 2006 I was going to get dirt diggers from barnett ive got the top end bored with wiesco pistons and speed tech porting,k&n,jetted,the bore is in my siggy. 520319[/snapback] Toomey always worked good for me Quote Link to comment Share on other sites More sharing options...
Rebel3190 Posted May 26, 2006 Author Report Share Posted May 26, 2006 i just ordered clutches,easy pull lever,and some other goodies from fasttoys Quote Link to comment Share on other sites More sharing options...
dajogejr Posted May 26, 2006 Report Share Posted May 26, 2006 Yep...you're done now. After a few phone calls to Jeff, you'll be in jail and/or divorce court...holding up a sign for food. Will ride shee for food... Actually, it's the other way around...if he keeps it up, he's going to be in divorce court. Remember, Jeff... You can sell me any one of those machines for a dollar, and I'll sell it back to you. Just leave the keys.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.