87sheerips Posted May 19, 2006 Report Share Posted May 19, 2006 OK, so went to silver lake dunes last weekend for the first ride on the cylinders. All I can say is AWESOME POWER. I had no problemns whatsoever, besides traction with these damn sand sharks. Im all over the place off the line. Great power all the way though, it just wants throttle!! Anyway, in the drags i was smoking the new 450 quads, and my budies banshee. The only thing keepin up with me was a new honda 450 bike, with a paddle of course. Figured Id let ya know, ill have vidoes soon of this day! Quote Link to comment Share on other sites More sharing options...
BKOLFO4 Posted May 19, 2006 Report Share Posted May 19, 2006 Man I am loving mine too. He did a great job. He also bored my cylinders. Must have done a pretty good job on that as well. I have 22cc domes and I am getting 140 PSI compression since it has broke in. Brian Quote Link to comment Share on other sites More sharing options...
Machwon Posted May 19, 2006 Report Share Posted May 19, 2006 Hey guys thanks for the good words here. In case you guys don't know I go by Machwon on a couple of the message boards. I was hoping you would put the smokes on a buddies trx520 nmotion R and ice cube yfz with your pump gas banshee, but I think they only went to West Michigan sand drags last weekend and skipped the dunes. I can't wait to see those videos. Quote Link to comment Share on other sites More sharing options...
KlotzBanshee Posted May 19, 2006 Report Share Posted May 19, 2006 I'm going to be in the market for some work on mine this off season. Where abouts you located? Quote Link to comment Share on other sites More sharing options...
csrmel Posted May 20, 2006 Report Share Posted May 20, 2006 im hearing really good things about youre porting services, mainly the cheap prices which i like alot. this presents a dilemma for me though, as i had planned on NOT getting any porting done untill my top end is due for a rebuild. sence i just bought my quad brand new a few months ago, this could be time frame of atleast a few years. youre porting is so low cost and i have only heard good things about it, i am considering tearing my perfectly good stock top end apart and sending you my cylinders for porting. do you think i would be able to squeek by just honing the cylinders and re ringing it without installing new pistons? Quote Link to comment Share on other sites More sharing options...
Machwon Posted May 20, 2006 Report Share Posted May 20, 2006 Were located about 30 min. NE of Lansing in Ovid. As for the topend question I would have to see the cylinders to give you a positive answer. I don't charge to mic them so let me know if interested. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.