JArmShee Posted May 17, 2006 Report Share Posted May 17, 2006 (edited) Putting the Shee back together tonight The woodruff key broke off last year and marked up the crank groove pretty good. a year later Im putting everythign back together. Heres the stupid "Q" Is there a way I can make sure the key will stay in place. especially since its surfaces are not 100% Edited May 17, 2006 by JArmShee Quote Link to comment Share on other sites More sharing options...
Toybreaker Posted May 17, 2006 Report Share Posted May 17, 2006 Get some 400 grit or finer lapping compound. Very lightly coat the round side of the key with the paste and slip it into the groove. Wipe up any excess without moving the key. Shouldn't move then. Quote Link to comment Share on other sites More sharing options...
JArmShee Posted May 17, 2006 Author Report Share Posted May 17, 2006 Thanks ToyBreaker And not to Question your Knowledge But has anyone else tried this method? Quote Link to comment Share on other sites More sharing options...
i12gofast Posted May 18, 2006 Report Share Posted May 18, 2006 Id use about 2 cc's of homemade babybatter , should keep it sticky like your girls hair. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.