jbooker82 Posted May 13, 2006 Report Share Posted May 13, 2006 Here is some pictures of the coatings that I applied to my domes and pistons. I did the Domes and heads of the pistons with a heat reflective coating. The skirs are done with a dry film lubercant. You have to bake this stuff on for an hour at 300 deg. I did this to my 720cc raptor piston and it seems to be holding up. I have not had it appart to see what it looks like, but so far so good. I figure that the banshee will really let me know, since you have to do top ends on 2 strokes a little more than 4 strokes. Let me know what you think josh Quote Link to comment Share on other sites More sharing options...
waycott_259 Posted May 13, 2006 Report Share Posted May 13, 2006 loooks good man..let us know how it works for ya Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.