polaris336 Posted May 12, 2006 Report Share Posted May 12, 2006 Hey Guys, I'm going to the Little Sahara Dunes in Oklahoma in 2 weeks, May 25 to June 2nd. My banshee has been under construction for awhile and am getting T-5's but have no idea what to jet it to, at least the ball park. motor wise it will be stock everything xcept the T-5's Prodesign foam filter with the lid removed. i live in minnesota and this will be my 1st dune trip and CANT WAIT TO GO PLEASE HELP! or if you might know where else i can go for help. thanks for reading! Quote Link to comment Share on other sites More sharing options...
dajogejr Posted May 12, 2006 Report Share Posted May 12, 2006 Stock Pilots, 1.0 to 2.0 turns out on air screw Stock Needle, 3rd Clip. Toomey Needle (didn't say if you had these or stock) 4th clip Main Jet 280. This should be close... You didn't say what temp or elevation you'd be riding at, I'm taking into consideration your less than 1000 Ft and around 70 F temps. Quote Link to comment Share on other sites More sharing options...
icecold_shee Posted May 12, 2006 Report Share Posted May 12, 2006 (edited) i think the elevation is around 800-1000 ft above sea level and temps will be round 90 in the day, id start with a 300 main, stock pilot i ran 340 mains, with t5s, v-force, and k@n clamp ons, and a 30 pilot Edited May 12, 2006 by icecold_shee Quote Link to comment Share on other sites More sharing options...
wesw Posted May 12, 2006 Report Share Posted May 12, 2006 4th clip and 310 work good with pipes and open box. Quote Link to comment Share on other sites More sharing options...
dajogejr Posted May 12, 2006 Report Share Posted May 12, 2006 Wes...your avitar and sig still kill me everytime... Makes the HQ hard to read at work... Quote Link to comment Share on other sites More sharing options...
polaris336 Posted May 14, 2006 Author Report Share Posted May 14, 2006 thanks for the replys guys. i had fmf's gnarlys, lid off, and that was at 300's so ya think i should get some 310's,320's, 330's and maybe 340's and run stock pilots. and maybe start out with 310's when i get there and see how that goes? thanks again guys! Quote Link to comment Share on other sites More sharing options...
badassbanshee479 Posted May 15, 2006 Report Share Posted May 15, 2006 they have on site dyno services if you want to get it perfect. not sure how much it costs, cant be to much though. just an idea have fun Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.