Justintoxicated Posted May 1, 2006 Report Share Posted May 1, 2006 (edited) So I'm finaly getting rid of them. They have nice smooth power from bottom to top but it is time to try something new... These are Used FMF Fatty pipes. No Dents or Cracks. One pipe has a bit of rust, mostly on the under side between the exhaust port and the pipe hanger. It started a month after I bought the pipes. Pretty typical with nickle plated FMF pipes. Anyways, I keep my stuff in good condition. The seals are TM Designs No Leak One piece pipe colars. They use expanding silicon rings inside them. I really like these things as they have not given me any problems for several years now, and I can take the pipe apart from tthe silencer without any tools and it saves a bit of time. The trick to these seals is to put some grease on the O-rings them when you slide the silencer into the pipe. I would keep them but they won't work on the pipes I'm going to get. I think I paid $60 for them new. Looking for $350 I have a recent pic of them installed, and will get a pic of them as they are off the bike showing the spot on the finish soon. If you look close you can see a little but of the spot in this pic. PIPES SOLD Edited May 31, 2006 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
badass_r6 Posted May 1, 2006 Report Share Posted May 1, 2006 Is that price shipped? Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted May 1, 2006 Author Report Share Posted May 1, 2006 350 + shipping. Prefer Money order but would also take PP, just add 3%. Zipcode is 90815 if you want to estimate shipping. Quote Link to comment Share on other sites More sharing options...
badass_r6 Posted May 2, 2006 Report Share Posted May 2, 2006 Any way you could take a closer picture of the rust? I am very interested and not trying to waste your time. Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted May 2, 2006 Author Report Share Posted May 2, 2006 Any way you could take a closer picture of the rust? I am very interested and not trying to waste your time. 510807[/snapback] Yea thats my plan I don't want anyone buying something and not being happy., you can tell in the pic is it not too noticable when they are cleaned up, but it is larger than in the pic, just on the underside of the pipe. If one was to have them chromed or ceramiq coated they would look alot better than the nickle plating does after a short time. But functionaly they are a great pipe, I just need something that will work with the new motor better. I will try to get some pics asap. Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted May 4, 2006 Author Report Share Posted May 4, 2006 (edited) Same pipes off the bike (carefuly laid on ground because I was in a hurry taking these!) Silencers Tm Designs Clamps Closeup of rust spot. The bottom of the pipes are discolored from use, I had tried to spray some metalcast ground coat over the rust spot to stop it from spreading (since it was not in an obvious spot, but most of it came off or turned gold as you can see in the pic or fell off. There is also some rust on the close up pipe under the Hanger Bracket and along the weld (guess FMF forgot to Nickle plate that part as good as the rest...) Also not shown are a few marks from where the pipe springs rubbed one of the pipes. Over all they are in good shape just some cosmetics, luckily in places that are not the most noticable. They are used pipes so these things just happen over time, especialy with nickle plating. But they don't look too bad installed, better than no nickle plating at all Edited May 4, 2006 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted May 5, 2006 Author Report Share Posted May 5, 2006 Still for sale. Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted May 8, 2006 Author Report Share Posted May 8, 2006 come on somone buy these, they are good shape and reasonable price and you know damn well you will get them if you by them from me. If you want more pics etc pm me and they will be there. Quote Link to comment Share on other sites More sharing options...
ellison445 Posted May 8, 2006 Report Share Posted May 8, 2006 How much for the clamps? Quote Link to comment Share on other sites More sharing options...
Hilarious Posted May 8, 2006 Report Share Posted May 8, 2006 I've have a set of those same clamps. I like em a lot, they dont leak and are easy to install and remove. Had em on with my fattys and they fit my cpis perfectly. Free bump! Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted May 9, 2006 Author Report Share Posted May 9, 2006 If these don't sell as a set I will consider selling the clamps seperate at a later date. Quote Link to comment Share on other sites More sharing options...
fsubanshee Posted May 10, 2006 Report Share Posted May 10, 2006 I'd be willing to buy them from you for $350 if it included shipping to 48162 Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted May 11, 2006 Author Report Share Posted May 11, 2006 If no one else offers me more I will probably be able to do that I will have to figure out shipping this weekend. Might have to ship 2 seperate boxes unless you have any ideas Quote Link to comment Share on other sites More sharing options...
ellison445 Posted May 11, 2006 Report Share Posted May 11, 2006 USPS will be the cheapest.. I paid 20 to ship a set of t-5s If no one else offers me more I will probably be able to do that I will have to figure out shipping this weekend. Might have to ship 2 seperate boxes unless you have any ideas 514645[/snapback] Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted May 12, 2006 Author Report Share Posted May 12, 2006 USPS will be the cheapest.. I paid 20 to ship a set of t-5s 514652[/snapback] Thanks for the tip, did you use a single box? fsubanshee, If I don't get 350 + shipping by the end of the week and you still want them reply here or send me a PM, just cleaned out some space in inbox. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.