jbooker82 Posted April 15, 2006 Report Share Posted April 15, 2006 (edited) Would some body give me a good starting point for these mods. Altitude 2000 Feet above sea level. Bored .020 over MX Porting FMF SST with Turbine Core 2 Silencers Pro Design Cool head with 20cc domes Stator Timing set at +3.5 deg Pro Flow with K&N no air box lid Keihin PJ 34mm Carbs Vforce 2 Reeds I bought this banshee used and dont have any idea what jets or needles are currently installed. I believe that I am rich, and was kind of wanting a guide line to order some jets. You cant really compair jetting to the stock mikuni 26mm carbs can you? Thanks for your time, Your help is much appreciated josh Edited April 15, 2006 by jbooker82 Quote Link to comment Share on other sites More sharing options...
bansheeseat$$ Posted April 15, 2006 Report Share Posted April 15, 2006 Hey Josh,Stock carbs are actually 26mm and no you can't compare the jets they are different brands and they use different parts and numbers.You will need to see what jets are in it and do some plug chops and go from there with your jetting. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted April 15, 2006 Author Report Share Posted April 15, 2006 Well i was just kind of wanting a starting guide line. It is a lot easier jetting when you start out with a stock machine and you do the jettting your self. You kind of get a feel for what you should be running. That way each mod you do you jump up the jet size, compaired to jumping in head first with ton of mods. josh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.