Bird Eyes Posted March 28, 2006 Report Share Posted March 28, 2006 My father in law gave me a couple of ITP rims. They were thrown in when he purchased a Kaw Bayou used. They definatly do not fit my shee but I don't think they fit the Kaw either. These things are brand new & I would like to try and sell them but I need to try & figure out what they go to. They have some #'s on the inside but I think that they just tell ya the size. Does anybody have an idea of how I can find this info out? Thanks in advance for any info. Quote Link to comment Share on other sites More sharing options...
Wallrat Posted March 28, 2006 Report Share Posted March 28, 2006 If I remember correctly, you need to measure (in mm) from bolt center to center across the middle of the wheel. Quote Link to comment Share on other sites More sharing options...
txblueshee Posted March 28, 2006 Report Share Posted March 28, 2006 Then you can look up in RMATV or dennis kirk and it will tell you the wheel offset measurements... Mike Quote Link to comment Share on other sites More sharing options...
pipebomb Posted March 29, 2006 Report Share Posted March 29, 2006 (edited) I did a whole write up on that kinda stuff for another board. heres a link to them. FAQ: How do I tell what size my bolt pattern is? FAQ: How do I tell the offset & size of my wheels? when you figure out the size, let me know. I got a whole listing of what size rims fit what bike. Edited March 29, 2006 by pipebomb Quote Link to comment Share on other sites More sharing options...
Bird Eyes Posted March 29, 2006 Author Report Share Posted March 29, 2006 I did a whole write up on that kinda stuff for another board. heres a link to them. FAQ: How do I tell what size my bolt pattern is? FAQ: How do I tell the offset & size of my wheels? when you figure out the size, let me know. I got a whole listing of what size rims fit what bike. 494021[/snapback] Thanks man...I'll check this out. Quote Link to comment Share on other sites More sharing options...
FadedDreams Posted March 30, 2006 Report Share Posted March 30, 2006 If they are from the Bayou,the bolt pattern is 4/137. Quote Link to comment Share on other sites More sharing options...
MudSlinger09 Posted March 30, 2006 Report Share Posted March 30, 2006 take some pics of them , if they are the billet aluminum ones i want em , theyre 12x7`s right? Quote Link to comment Share on other sites More sharing options...
Bird Eyes Posted April 3, 2006 Author Report Share Posted April 3, 2006 take some pics of them , if they are the billet aluminum ones i want em , theyre 12x7`s right? 494528[/snapback] Sorry I have not gotten back here until today... I will try and take some pics tonight as well as give you the #'s that are on the inside. Quote Link to comment Share on other sites More sharing options...
Bird Eyes Posted April 20, 2006 Author Report Share Posted April 20, 2006 I have figured out the bolt pattern... 4 lugs@110mm appart. They are ITP C series, size is 27X7. Can anyone tell me what quads these will fit on? Quote Link to comment Share on other sites More sharing options...
**BrAnDoN** Posted July 14, 2006 Report Share Posted July 14, 2006 Not sure but if ther're Powder-coated Black I'll think about buyin 'em. :thumb: Quote Link to comment Share on other sites More sharing options...
pipebomb Posted July 15, 2006 Report Share Posted July 15, 2006 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.