rolldesignbanshee Posted March 23, 2006 Report Share Posted March 23, 2006 Can someone please tell me who makes a good tool for adjusting the bearing carrier on a honda style swingarm. Dont tell me a screwdriver or a punch either please. Im looking for a specefic tool to align with the holes in the carrier. Thanks. Quote Link to comment Share on other sites More sharing options...
woodro77 Posted March 23, 2006 Report Share Posted March 23, 2006 Can someone please tell me who makes a good tool for adjusting the bearing carrier on a honda style swingarm. Dont tell me a screwdriver or a punch either please. Im looking for a specefic tool to align with the holes in the carrier. Thanks. 491456[/snapback] a screwdriver or a punch just kidding , never seen a tool made for that Quote Link to comment Share on other sites More sharing options...
sheefreak Posted March 23, 2006 Report Share Posted March 23, 2006 They are usually included w/a good carrier, but not sure where to buy separate. I am sure you could look up factory parts on about any year Honda quad and find one. Quote Link to comment Share on other sites More sharing options...
pipebomb Posted March 23, 2006 Report Share Posted March 23, 2006 http://www.jlatvproducts.com/catalog/index.htm part# RAT100 (aluminum) or RAT300 (Steel) Quote Link to comment Share on other sites More sharing options...
odaen Posted March 23, 2006 Report Share Posted March 23, 2006 call up lonestar and ask them how much they'd want for one......might just send you one free. they sent me one of those caliper post bushings for free once. Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted March 23, 2006 Report Share Posted March 23, 2006 I don't sell a spanner wrench with mine, I just include a piece of 5/16" 4130 rod about 4-5 inches long. You shouldn't need a big wrench to adjust a carrier. Quote Link to comment Share on other sites More sharing options...
sheefreak Posted March 23, 2006 Report Share Posted March 23, 2006 Stan, what would you charge to send one to 49015? Quote Link to comment Share on other sites More sharing options...
rolldesignbanshee Posted March 23, 2006 Author Report Share Posted March 23, 2006 Thanks for the info about the JL tool, thats what I was looking for. This is a great forum!!! Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted March 23, 2006 Report Share Posted March 23, 2006 (edited) I bent my piece of rod that came with mine... damn thing would not move! Well it did shortly after the rod bent... Are you sure the aluminum and steel are both the same? They have different product descriptions. Edited March 23, 2006 by Justintoxicated Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted March 24, 2006 Report Share Posted March 24, 2006 Stan, what would you charge to send one to 49015? 491585[/snapback] When you say "one", one what? If you're looking for a piece of 5/16" stock cut to 5" and deburred, I'll check on what the material cost is, and just sell it to you at cost. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.