senoroms Posted March 23, 2006 Report Share Posted March 23, 2006 im about to get my port job and get it trued and welded, but i wanted to remove the factory paint on the cylinders and was wondering whats the best way. plus is there anything else that i should do while i have the toped end off that might give me alittle more out of my engine. i already have the head milled and of course its piped and running clamp ons. Quote Link to comment Share on other sites More sharing options...
sheefreak Posted March 23, 2006 Report Share Posted March 23, 2006 Sandblast. Quote Link to comment Share on other sites More sharing options...
gipperz Posted March 23, 2006 Report Share Posted March 23, 2006 Industial paint stripper and a wire brush. Quote Link to comment Share on other sites More sharing options...
racer Posted March 23, 2006 Report Share Posted March 23, 2006 sandblast or aircraft stripper. that shit is caustic. Quote Link to comment Share on other sites More sharing options...
Capone Posted March 23, 2006 Report Share Posted March 23, 2006 Industial paint stripper and a wire brush. 491254[/snapback] Wear gloves + safety glasses. This shit will burn your skin, and if you get any on you water neutralizes it. Just a FYI if you didn't know. Quote Link to comment Share on other sites More sharing options...
Dinner Posted March 23, 2006 Report Share Posted March 23, 2006 I just used a wire brush that you put in a drill ...takes longer though Quote Link to comment Share on other sites More sharing options...
daryn c Posted March 23, 2006 Report Share Posted March 23, 2006 sand blast is the best way to me Quote Link to comment Share on other sites More sharing options...
ATB Posted March 23, 2006 Report Share Posted March 23, 2006 barro c Quote Link to comment Share on other sites More sharing options...
2bzy2p Posted March 23, 2006 Report Share Posted March 23, 2006 barro c Quote Link to comment Share on other sites More sharing options...
Shee-Male Posted March 23, 2006 Report Share Posted March 23, 2006 glass beading for that raw OEM look! Quote Link to comment Share on other sites More sharing options...
. Posted March 23, 2006 Report Share Posted March 23, 2006 if you havent done it yet....GO TO WAL-MART. They have a spray on paint stripper that works wonders. Spray it on and wait about 15 minutes and you can basically hold it under the water and the paint comes off. get yourself a small wire brush or even a brillo pad will basically take it off. IT WORKS WONDERS, its not that fumy, and it wont kill your skin if you happen to get it on you by accident (just dont leave it on there for kicks n giggles though) Quote Link to comment Share on other sites More sharing options...
senoroms Posted March 26, 2006 Author Report Share Posted March 26, 2006 wow thanks guys for the help but what was the name of the spray on stripper from walmart? i want to try that one before i try anything else and burn the skin off my arms! Quote Link to comment Share on other sites More sharing options...
. Posted March 26, 2006 Report Share Posted March 26, 2006 heck, I forget what its called....I believe its in the paint section, or might be in the automotive section, it was like 2 years ago when I used it last.....worked wonders Quote Link to comment Share on other sites More sharing options...
Cotton eyed Joe Posted March 26, 2006 Report Share Posted March 26, 2006 I think the brand name is Aircraft Stripper. I've used it, and it didn't touch the paint on the head I was going to polish. What ever they paint the heads with is on there good. Quote Link to comment Share on other sites More sharing options...
DIRTMAN350 Posted March 28, 2006 Report Share Posted March 28, 2006 Yeah somebody needs to tell ATB to type in english. Not everyone here can read his language. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.