Dcuzz23 Posted March 18, 2006 Report Share Posted March 18, 2006 Im trying to find sizes and thread pitches for the banshee frame. i got the tools just looking for a list or something that would simplify the process and to eliminate errors with wrong taps. i know theres some where where you can find this out figured id ask yall first. thanks Quote Link to comment Share on other sites More sharing options...
Tim C Posted March 18, 2006 Report Share Posted March 18, 2006 (edited) Ive seen a list of the bolts with the thread sizes and pitches somewhere - can't remember where.......might have been in one of the manuals but I don't have them hare. Your best bet would be to get a thread pitch guage - they're only cheap. Edited March 19, 2006 by Tim C Quote Link to comment Share on other sites More sharing options...
Toybreaker Posted March 19, 2006 Report Share Posted March 19, 2006 Or you could go to Grainger or your local industrial supplier and get a thread size checker. If you do this kind of stuff a lot, its the best $40 you will ever spend. I have one for standard and metric threads. It has paid for itself many times over already. Quote Link to comment Share on other sites More sharing options...
racer Posted March 20, 2006 Report Share Posted March 20, 2006 6mm x 1.00 and 8mm x 1.25, those are the only sizes i can think of that are tapped into the frame. there are some 10mm x 1.5 some places, but thats like for the wheel hubs, and the lower motor mounts. Quote Link to comment Share on other sites More sharing options...
Dcuzz23 Posted March 20, 2006 Author Report Share Posted March 20, 2006 6mmx1.00all others 7mmx1.00-motor mount bolts only 8mmx1.25all others 10mmx1.25foot peg bolts only thes for taps are all u need to tap a whole entire frame did it the long way. Quote Link to comment Share on other sites More sharing options...
Dead Op Posted March 21, 2006 Report Share Posted March 21, 2006 Look in a clymers manual there is a chart tells you all the sizes of the treads! Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted March 22, 2006 Report Share Posted March 22, 2006 a good powdercoater will plug the holes so u dont have to rethread anything.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.